| 7021ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | B5:59.766 mm; Hydraulic nut:HMVC 76E; d1:354.012 mm; G:378.993 mm; B:48.666 mm; Sleeve:S 3076x13.15/16; Mass adapter sleeve assembly:43 kg; d3 max.:450.977 mm; d:380 mm; B1:196.418 mm; Threads per inch:5; |
| 7018ACDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | h1:265 mm; d4 ≈:92 mm; Material constant KM:330; w:80 mm; r1 min.:1 mm; dk:92 mm; d2 max.:162 mm; l3 min.:80 mm; G:M 72x4; B:49 mm; l5 ≈:40 mm; Specific dynamic load factor K:100 N/mm²; d:70 mm; l7 min.:80 mm; l4 max.:349 mm; C1 max.:43 mm; Basic dynamic load rating C:315 kN; α:6 °; Mass rod end:10.5 kg; Basic static load rating C0:530 kN; |
| 7016ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | r1 min.:0.6 mm; Lubricant:Regular relubricatio; Da min.:92 mm; Sealing solution:Triple-lip seals; da min.:75.7 mm; Da max.:99 mm; b1:7.7 mm; d:70 mm; B:65 mm; b:7.7 mm; Material constant KM:330; α:4 °; Specific dynamic load factor K:100 N/mm²; D:105 mm; Basic dynamic load rating C:315 kN; M:4 mm; d1 ≈:78 mm; ra max.:0.6 mm; Mass plain bearing:1.65 kg; Basic static load rating C0:1560 kN; |
| 7022CD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Da max.:67.4 mm; Specific dynamic load factor K:100 N/mm²; d1 ≈:54.991 mm; B:66.675 mm; Design (sliding contact surface combination):Steel/steel; d:44.45 mm; C:33.325 mm; da min.:49.9 mm; α:9 °; r1 min.:1 mm; Da min.:60.7 mm; Specific static load factor K0:300 N/mm²; M:4 mm; rb max.:1 mm; Basic dynamic load rating C:170 kN; ra max.:1 mm; b:4.8 mm; Lubricant:Regular relubricatio; |
| 7018ACD/P4ATBTB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Hydraulic nut:HMV 160E; G2:G 1/8; B5:112 mm; B:90 mm; d:800 mm; d1:750 mm; G:Tr 800x7; d3:920 mm; B1:366 mm; A:10 mm; G3:13 mm; Mass adapter sleeve assembly:302 kg; |
| 708CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Fillet Radius ra:3.00 mm; D:460.0000 mm; Basic Dynamic Radial Load Rating C:358000 N; Accessories:Shield & Seal; d:300.000 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Static Radial Load Rating Co:500000 N; Grease Speed Rating Open/Shielded n1:1200 rpm; Sealed Speed Rating n3:780 rpm; B:74.00 mm; |
| 7016ACDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Da max.:693 mm; Reference speed:200 r/min; r1,2 min.:4 mm; Minimum axial load factor A:21.255; D:800 mm; H:105 mm; D1:675 mm; ra max.:3 mm; d1:795 mm; Limiting speed:400 r/min; Fatigue load limit Pu:980 kN; Mass bearing:110 kg; d:670 mm; B:31.5 mm; Basic dynamic load rating C:2550 kN; da min.:777 mm; Basic static load rating C0:16300 kN; |
| 7016CD/HCP4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | L:193.675 mm; A5:38.1 mm; Limiting speed:2800 r/min; s:31.75 mm; Mass bearing unit:12.2 kg; A6:26.988 mm; Basic dynamic load rating C:212 kN; A:69.85 mm; S:0.794 mm; J:152.4 mm; a:6.35 mm; N1:20.637 mm; da:76.2 mm; Attachment bolt diameter G:4 x 19.05; |
| 7015CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Cap bolt recommended tightening torque:4284.4 N·m; J1:139.7 mm; Ca:147.803 mm; Cap bolt, SAE grade:8; Labyrinth ring:2 x LOR 666; Mass pillow block:431 kg; A2:317.5 mm; S:4.763 mm; Da:419.999 mm; P120°:249 kN; P60°:669 kN; h:87.313 mm; H1:250.825 mm; J max.:749.3 mm; H:495.3 mm; Eye bolt:2 x 1/2-13 UNC; H2:101.6 mm; R1:163.512 mm; Stabilizing ring:SR-0-40; A1:228.6 mm; |
| 7014CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | N1:25.4 mm; RG:3/8 NPT; P150°:32 kN; H2:44.45 mm; A1:111.125 mm; Cap bolt:2 x 3/4-10 UNC; P90°:56.5 kN; Taconite seal (dc shaft position):TER 188; P60°:94.3 kN; End plug (suffix Y):EPR 11; P120°:35.6 kN; dc:80.975 mm; PG:1/4 NPT; h:47.625 mm; J max.:333.375 mm; da:85 mm; R2:30.163 mm; Stabilizing ring:2 x SR-1617; Ca:69.799 mm; Appropriate attachment bolt size G:0.875 in; |