| REXROTH Z2FS 10-5-3X/ R900989095 Throttle check valve | snap ring included:Without Snap Ring; bore type:Round; Internal Special Features:No; Bore Diameter (mm):45; bore diameter:45 mm; internal clearance:CN; Enclosure:2 Seals; Inch - Metric:Metric; Long Description:45MM Bore; 68MM Outs; Weight:0,128 Kg; |
| REXROTH Z2FS 22-8-3X/SV R900474580 Throttle check valve | r1s min:2 mm; d:50 mm; Static load, C0:131 kN; Mass (without HJ ring):1.76 kg; Inventory:0.0; Characteristic rolling element frequency, BSF:5.15 Hz; Fatigue limit load, Cu:16 kN; Size (mm):50x110x40; E:95 mm; Width (mm):40; |
| REXROTH Z2FS 22-8-3X/S2V R900468786 Throttle check valve | Bore Diameter (mm):85; d:85 mm; B:49,23 mm; Bearing number:5217G PRB; Brand:Timken; C:49,23 mm; Weight:3,724 Kg; D:150 mm; Basic dynamic load rating (C):188 kN; Size (mm):85x150x49.23; |
| REXROTH Z2FS 16-8-3X/SV R900470529 Throttle check valve | (Grease) Lubrication Speed:600 r/min; B:140 mm; Size (mm):710x950x140; Basic static load rating (C0):8530 kN; Weight:286 Kg; Bore Diameter (mm):710; Fw:774 mm; Outer Diameter (mm):950; C:140 mm; Basic dynamic load rating (C):3650 kN; |
| REXROTH Z2FS 22-8-3X/S2 R900443176 Throttle check valve | Housing Width A:1.752 in; Weight:4.43 lb; Dimension L2:12.70 mm; Bearing Number:GY1104KRRB SGT; Slot Width A1:13.5 mm; Height H2:63.5 mm; Seal Type:Shroud Seal; Center of Bearing from End S:22.2 mm; Shaft Size d:1 1/4 in; Series:Industrial; |
| REXROTH Z2FS 22-8-3X/S R900456783 Throttle check valve | Basic dynamic load rating (C):6,1 kN; Inventory:0.0; Fw:10 mm; Weight / LBS:0.009; Harmonized Tariff Code:8482.99.65.30; Inch - Metric:Metric; Bc:13 mm; Category:Needle Non Thrust Ro; Retainer:Yes; Enclosure:Not Applicable; |
| REXROTH Z2FS 16-8-3X/S R900459203 Throttle check valve | Calculation factor (e):0,47; (Oil) Lubrication Speed:2600 r/min; Brand:PSL; a:34 mm; (Grease) Lubrication Speed:1900 r/min; Weight:1,7 Kg; Db min.:165 mm; T:27 mm; r3 min.:0,6 mm; Bearing number:T4CB120; |
| REXROTH Z2FS 16-8-3X/S2 R900457256 Throttle check valve | Basic dynamic load rating (C):14 kN; Basic static load rating (C0):3,9 kN; Width (mm):15; C:15 mm; Outer Diameter (mm):52; Size (mm):20x52x15; Bearing number:1205 KTN9+H205; (Grease) Lubrication Speed:13770 r/min; d:20 mm; Weight:0,21 Kg; |