| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:20.2 kg; K:6 mm; B:80 mm; Calculation factor e:0.28; Da max.:238 mm; d3:195 mm; Calculation factor Y1:2.4; Basic static load rating C0:1200 kN; d1:135 mm; r1,2 min.:2.1 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
| SMITH HR-1-C Cam Follower and Track Roller - Stud Type | D:35 mm; d2:21.1 mm; Preload class B GB:150 N; Number of balls z:12; Reference grease quantity Gref:0.68 cm³; r3,4 min.:0.15 mm; Preload class C GC:300 N; Calculation factor e:0.68; Mass bearing:0.03 kg; Static axial stiffness, preload class C:99 N/µm; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH YAG-08 Cam Follower and Track Roller - Yoke Type | d3 max.:171.577 mm; B1:95.301 mm; B:22.479 mm; d1:111.125 mm; Lock washer:W 26; Lock nut:AN 26; G:129.692 mm; Mass adapter sleeve assembly:4.4 kg; Sleeve:S 26x4.3/8; Hydraulic nut:HMVC 26E; |
| SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; d:30.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:45700 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:One Shield; |
| SMITH FCR-2-1/4 Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:88400 N; Oil Speed Rating n2:19000 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:61000 N; B:29.00 mm; Fillet Radius rb:1.00 mm; d:55.000 mm; Fillet Radius ra:2.00 mm; |
| SMITH MCR-26-B Cam Follower and Track Roller - Stud Type | ra max.:5 mm; Calculation factor kr:0.3; das:553 mm; Basic dynamic load rating C:3800 kN; s max.:16 mm; Fatigue load limit Pu:570 kN; B:167 mm; Calculation factor Y:0.4; Da max.:697 mm; Calculation factor e:0.3; |
| SMITH MCR-35-B Cam Follower and Track Roller - Stud Type | D:120.0000 mm; Grease Speed Rating n1:4800 rpm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:85200 N; B:29.00 mm; d:55.000 mm; Basic Static Radial Load Rating Co:60000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; |
| SMITH CR-11/16-XBC Cam Follower and Track Roller - Stud Type | H:551 mm; A1:280 mm; J6:740 mm; Eye bolt, size:2 x M 24; s:16 mm; P0°:4000 kN; Oil seal:2 x TSD 3156 U; A:315 mm; Oil level, max.:92 mm; H2:105 mm; |