| No. | Brand | H | B | J | s | a | N | T | U |
| MUTD-50 | SMITH | - | - | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| MCR-26-B | SMITH | - | 167 mm | - | - | - | - | - | - |
| FCR-2-1/4 | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |
| SMITH MFCR-40 Cam Follower and Track Roller - Stud Type | D:47.0000 mm; Oil Speed Rating n2:13000 rpm; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:1.00 mm; Accessories:Two Seals; B:20.60 mm; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:20500 N; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH MCR-30 Cam Follower and Track Roller - Stud Type | Cap bolt, size:M 30x220; Eye bolt, size:2 x M 30; P120°:2500 kN; Oil level, max.:108 mm; Appropriate attachment bolt, size G:36 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:320 mm; ba min.:149 mm; L:880 mm; Oil level, min.:84 mm; |
| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type | J:600 mm; H1:240 mm; db:280 mm; N:42 mm; H2:95 mm; Labyrinth seal:2 x TS 60; bc:141.5 mm; Initial grease fill, 40%:3.9 kg; ba max.:136 mm; |
| SMITH DCR-1-5/8 Cam Follower and Track Roller - Stud Type | B:1.25 mm; d:30 mm; M:27.5 mm; d1:38 mm; Mass lock washer:0.008 kg; d2:49 mm; f:5 mm; |
| SMITH IRR-2 Needle Non Thrust Roller Bearings | Basic dynamic load rating C:433 kN; Fatigue load limit Pu:49 kN; da min.:108 mm; Calculation factor Y1:2.8; D1 ≈:159 mm; B:46 mm; Calculation factor Y2:4.2; Da max.:168 mm; b:8.3 mm; Limiting speed:4500 r/min; |
| SMITH YAG-08 Cam Follower and Track Roller - Yoke Type | d3 max.:171.577 mm; B1:95.301 mm; B:22.479 mm; d1:111.125 mm; Lock washer:W 26; Lock nut:AN 26; G:129.692 mm; Mass adapter sleeve assembly:4.4 kg; Sleeve:S 26x4.3/8; Hydraulic nut:HMVC 26E; |
| SMITH PCR-5 Cam Follower and Track Roller - Stud Type | Housing:SAW 544; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Stabilizing ring:SR-44-38; H2:95.25 mm; Ca:153.797 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; A2:304.8 mm; End plug (suffix Y):EPR 23; |
SMITH MCR-72-SB Cam Follower and Track Roller - Stud Type Video
MCR-72-SB - Detail - Manufacturer of Smith Bearing Cam ...
(D) Roller O.D. (mm), 72. (C) Roller Width (mm), 29. (d) Stud Dia. (mm), 24. (B1) Stud Length (mm), 49.5 ... SMITH Bearing® Number, MCR-72-SB.
SMI MCR 72 SB - Cam Follower and Track Roller - Stud Type
72MM Roller Diameter; 29MM Roller Width; Crowned Roller Surface Profile; 24MM Stud Diameter; M24X1.5 Thread Size; Standard Stud Stud Profile; ...
Metric Need Bearing Cam Follower, MCR-72-SB - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCR-72-SB, MCR-72-SB at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or ...
Smith Bearing | MCR-72-SB | Metric Needle Bearing Cam Follower ...
Smith Bearing MCR-72-SB. Metric Needle Bearing Cam Follower Caged Stud Type Hex Head slot Sealed Crowned. Item #106369450. $263.81 each.
SMITH BEARING MCR-72-SB-AG CAM FOLLOWER ... - eBay
SMITH BEARING MCR-72-SB-AG CAM FOLLOWER BEARING. CAM FOLLOWER BEARING. MANUFACTURED BY: SMITH BEARING. SMITH BEARING MCR-72-SB-AG.
Smith MCR72SB Cam Follower - Locate Ball Bearings
Product Description. New in Factory box -Mcr72sb Smith New Cam Follower. ×. Customers Also Viewed.
smith bearing mcr-72-sb
Looking for SMITH BEARING MCR-72-SB BEARING? Price $156.8 + Free Shipping! Easy online ordering with 24/7 expert product support.Roller Width: 1.142 Inch | 29 MillimeterOther Features: CagedThread Size: M24X1.5Seal Type: Sealed
MCR-72-SB Caged Stud Type Hex Head slot Sealed ...
The MCR-72-SB is produced by Smith Bearings and is described as a MCR-72-SB Caged Stud Type Hex Head slot Sealed Crowned Metric Needle Bearing Cam Follower.
SKU 766792 MDW MCR-72-SB Smith Bearing - Manufacturer quick ...
MCR-72-SB Smith Bearing - Manufacturer quick description : Metric Cam Follower-Regular Stud Caged-Sealed-Hex Drive ( ABC Accurate Bushing Co. ) Specifications: ...
MCR-72-SB Cam Followers - Smith & Lily Interchange - 养贞轴承
Smith Part No. MCR-72-SB. LILY Part No. LMCR-72-SB. Cross Reference, Smith. System of Measurement, Metric. Roller style, Stud Type. Roller Dia, 72 mm.