| No. | Brand | H | B | J | s | a | N | T | U |
| MYR-10-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| MCR-26-B | SMITH | - | 167 mm | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| FCR-2-1/4 | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| MUTD-50 | SMITH | - | - | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| MCRV-85-S | SMITH | 715 mm | - | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH MFCR-40 Cam Follower and Track Roller - Stud Type | D:47.0000 mm; Oil Speed Rating n2:13000 rpm; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:1.00 mm; Accessories:Two Seals; B:20.60 mm; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:20500 N; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:71.40 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; |
| SMITH PYR-8 Cam Follower and Track Roller - Yoke Type | L:419.1 mm; Cap bolt, SAE grade:5; Housing:SAW 524; P60°:185 kN; End plug (suffix Y):EPR 14; J1:69.85 mm; A1:120.65 mm; A2:254 mm; Da:215.001 mm; J min.:336.55 mm; |
| SMITH PCR-5 Cam Follower and Track Roller - Stud Type | Housing:SAW 544; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Stabilizing ring:SR-44-38; H2:95.25 mm; Ca:153.797 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; A2:304.8 mm; End plug (suffix Y):EPR 23; |
SMITH DYR-2-1/2 Cam Follower and Track Roller - Yoke Type Video