| No. | Brand | H | B | J | s | a | N | T | U |
| MCR-62-C | SMITH | - | - | 710 mm | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| IRR-2 | SMITH | - | 46 mm | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| SMITH MCRV-26-BC Cam Follower and Track Roller - Stud Type | d1 ≈:78.5 mm; Basic dynamic load rating C:110 kN; d:65 mm; da min.:74 mm; Calculation factor X:0.6; Calculation factor Y2:1.07; b:6.5 mm; h:6.5 mm; Da max.:111 mm; Calculation factor Y0:0.58; |
| SMITH CR-7/8-B-SS Cam Follower and Track Roller - Stud Type | Ca:198 mm; Adapter sleeve:SNP 3072x13.7/16; Cap bolt, rec. tightening torque:400 N·m; Appropriate attachment bolt, size G:36 mm; Q120°:2860 kN; H:631 mm; N:50 mm; H2:115 mm; A2:365 mm; Q150°:1650 kN; |
| SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Limiting speed:8500 r/min; Basic dynamic load rating C:38 kN; Mass needle roller and cage assembly:0.067 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Basic static load rating C0:75 kN; Fw:55 mm; U:20 mm; Ew:63 mm; Reference speed:7500 r/min; Fatigue load limit Pu:9.15 kN; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | a:2.381 mm; A:69.85 mm; L:174.625 mm; N1:17.462 mm; Mass bearing unit:7.76 kg; Attachment bolt diameter G:4 x 15.875; A5:34.131 mm; A6:25.4 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; |
| SMITH FCR-2-1/4 Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:88400 N; Oil Speed Rating n2:19000 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:61000 N; B:29.00 mm; Fillet Radius rb:1.00 mm; d:55.000 mm; Fillet Radius ra:2.00 mm; |
| SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Basic Static Radial Load Rating Co:15000 N; d:20.000 mm; D:72.0000 mm; Sealed Speed Rating n3:7300 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:30700 N; Fillet Radius ra:1.00 mm; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type Video