| No. | Brand | H | B | J | s | a | N | T | U |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| PCR-5 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
| PYR-7 | SMITH | - | 9 mm | - | - | 13.6 mm | - | - | - |
| MCR-90-SC | SMITH | 50 mm | - | - | - | - | - | - | - |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH MCR-30 Cam Follower and Track Roller - Stud Type | Cap bolt, size:M 30x220; Eye bolt, size:2 x M 30; P120°:2500 kN; Oil level, max.:108 mm; Appropriate attachment bolt, size G:36 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:320 mm; ba min.:149 mm; L:880 mm; Oil level, min.:84 mm; |
| SMITH MYR-15-SC Cam Follower and Track Roller - Yoke Type | Effective load carrying cross section A:28120 mm²; d:190 mm; D:210 mm; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:200 N/mm²; Mass bushing:1.76 kg; B:150 mm; Coefficient of friction µ min.:0.03; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; |
| SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; d:30.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:45700 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:One Shield; |
| SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | Bearing designation:634 ; Da:13.4 max; B:5 mm; Grease:35 000 min-1; D:16 mm; rs:0.3 mm; da:6.2 min; Pu:0.031 kN; ra:0.3 max; Oil:42 000 min-1; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Basic Static Radial Load Rating Co:15000 N; d:20.000 mm; D:72.0000 mm; Sealed Speed Rating n3:7300 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:30700 N; Fillet Radius ra:1.00 mm; |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
| SMITH MCRV-40-SB Cam Follower and Track Roller - Stud Type | R1:21 mm; J7:12.5 mm; Db1:77 mm; B4:5 mm; T:42.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A1:13 mm; A:32.5 mm; N:11.5 mm; GN:1/4-28 SAE-LT; |
| SMITH DYR-2-1/2 Cam Follower and Track Roller - Yoke Type | d1 ≈:648.1 mm; Calculation factor A:26.9; r3,4 min.:3 mm; Reference speed:700 r/min; d:560 mm; Calculation factor e:0.8; Calculation factor Y1:0.78; Calculation factor Y0:0.66; Db max.:807 mm; Calculation factor Y2:1.24; |
SMITH HR-3-1/4-XC Cam Follower and Track Roller - Stud Type Video