| No. | Brand | H | B | J | s | a | N | T | U |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| CR-11/16-XBC | SMITH | 551 mm | - | - | 16 mm | - | - | - | - |
| BCR-2-1/4-XC | SMITH | - | 41.30 mm | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| MYR-15-SC | SMITH | - | 150 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| BCR-3/4-C | SMITH | - | 32 mm | - | - | - | - | - | - |
| HR-1-7/8-BC | SMITH | - | 42.00 mm | - | - | - | - | - | - |
| MCR-26-B | SMITH | - | 167 mm | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| SMITH PCR-5 Cam Follower and Track Roller - Stud Type | Housing:SAW 544; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Stabilizing ring:SR-44-38; H2:95.25 mm; Ca:153.797 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; A2:304.8 mm; End plug (suffix Y):EPR 23; |
| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
| SMITH MFCR-40 Cam Follower and Track Roller - Stud Type | D:47.0000 mm; Oil Speed Rating n2:13000 rpm; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:1.00 mm; Accessories:Two Seals; B:20.60 mm; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:20500 N; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH DCR-1-5/8 Cam Follower and Track Roller - Stud Type | B:1.25 mm; d:30 mm; M:27.5 mm; d1:38 mm; Mass lock washer:0.008 kg; d2:49 mm; f:5 mm; |
| SMITH BCR-1-3/4-C Cam Follower and Track Roller - Stud Type | d1:105 mm; B:10.5 mm; d:55 mm; Mass shaft washer:0.5 kg; r1,2 min.:1.1 mm; |
| SMITH HR-1/2-B Cam Follower and Track Roller - Stud Type | T:292.1 mm; Comparative axial load rating CFa:153 kN; B:292.1 mm; Basic dynamic load rating C:3910 kN; d:347.662 mm; Calculation factor Y1:2; d1 ≈:372 mm; Design variant/feature:TQOSN/GWSI; Comparative radial load rating CF:950 kN; r1,2 min.:1 mm; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH YR-1-3/4-X-SS Cam Follower and Track Roller - Yoke Type | Grease Speed Rating n1:16000 rpm; Fillet Radius ra:0.64 mm; D:42.0000 mm; Oil Speed Rating n2:21000 rpm; d:20.000 mm; B:12.00 mm; Basic Dynamic Radial Load Rating C:9560 N; Basic Static Radial Load Rating Co:5600 N; |
| SMITH MCR-30 Cam Follower and Track Roller - Stud Type | Cap bolt, size:M 30x220; Eye bolt, size:2 x M 30; P120°:2500 kN; Oil level, max.:108 mm; Appropriate attachment bolt, size G:36 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:320 mm; ba min.:149 mm; L:880 mm; Oil level, min.:84 mm; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type | D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; Basic Dynamic Radial Load Rating C:13000 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Seals; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; |
SMITH VCR-8-1/2 Cam Follower and Track Roller - Stud Type Video