| No. | Brand | H | B | J | s | a | N | T | U |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| CR-11/16-XBC | SMITH | 551 mm | - | - | 16 mm | - | - | - | - |
| MYR-10-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-22-SBC | SMITH | - | 335 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| SMITH HR-1-C Cam Follower and Track Roller - Stud Type | D:35 mm; d2:21.1 mm; Preload class B GB:150 N; Number of balls z:12; Reference grease quantity Gref:0.68 cm³; r3,4 min.:0.15 mm; Preload class C GC:300 N; Calculation factor e:0.68; Mass bearing:0.03 kg; Static axial stiffness, preload class C:99 N/µm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH CR-7/8-B-SS Cam Follower and Track Roller - Stud Type | Ca:198 mm; Adapter sleeve:SNP 3072x13.7/16; Cap bolt, rec. tightening torque:400 N·m; Appropriate attachment bolt, size G:36 mm; Q120°:2860 kN; H:631 mm; N:50 mm; H2:115 mm; A2:365 mm; Q150°:1650 kN; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH CR-1-1/2-BC Cam Follower and Track Roller - Stud Type | with cylindrical bore:380 min-1; Grease:5850 kN; Oil:432.570 kN; d:420 mm; D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; B:150 mm; with tapered bore:450 min-1; rs (min):5 mm; |
| SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH MCR-26-B Cam Follower and Track Roller - Stud Type | ra max.:5 mm; Calculation factor kr:0.3; das:553 mm; Basic dynamic load rating C:3800 kN; s max.:16 mm; Fatigue load limit Pu:570 kN; B:167 mm; Calculation factor Y:0.4; Da max.:697 mm; Calculation factor e:0.3; |
| SMITH CR-7/8-XBE Cam Follower and Track Roller - Stud Type | B:51.00 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:310.0000 mm; d:200.000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; |
SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type Video
Smith Bearing HR-1-XBC | Cam Follower Crowned Heavy ...
SMITH BEARING HR-1-XBC Cam Follower Crowned Heavy Stud Hex Sock. In Stock. Item: AA3XMW Model: HR-1-XBCCross Ref: 11Y151. See variants (19). Shipping to.Roller Type: Crowned, Hex Socket HeadStud Material: Carbon SteelType: Heavy StudStud Length: 1"
Smith Bearing HR-1-XBC Cam Follower Needle Roller ...
Smith Bearing HR-1-XBC Cam Follower Needle Roller Bearing, Crowned-Heavy Stud with Hex-Drive Socket, Sealed, 1.000" ; Item Weight · ; Item model number · ...Item Weight: 1.00 poundsBearing Type: roller_bearingItem Diameter: 1.0 inches$32.22 · Out of stock
Cam Follower: 1.75 in Roller Dia., 1 in Roller Wd, 1 in Stud ...
Item # 11Y157 ; Mfr. Model # HR-1-3/4-XBC ; UNSPSC # 31171505 ; Catalog Page # N/A ; Item Cam Follower ...Bearing Type: Needle Roller, SealedStud Material: Carbon SteelRoller Width: 1 inStud Type: Concentric
Smith Bearing | HR-1-XBC | Needle Bearing Cam Follower Heavy ...
Shop Smith Bearing HR-1-XBC at Applied.com.
Cam Follower, Crowned, Heavy Stud, Hex Sock - Zoro Tools
Smith Bearing #HR-1-XBC Specifications · Roller Style: Heavy Stud · Roller Shape: Crowned · Face Design: Hex Socket · Roller Dia.: 1.0 in · Roller Width: 0.625 in ...Roller Type: Crowned, Hex Socket HeadStud Length (In.): 1.000Stud Material: Carbon SteelStud Length: 1.0 in
SMI HR 1 XBC - SMITH BEARING - BDI
1" Roller Diameter; 5/8" Roller Width; Crowned Roller Surface Profile; 5/8" Stud Diameter; 5/8-18 Thread Size; Heavy Stud Stud Profile; Sealed Enclosure; ...
HR-1-XBC - Detail - Manufacturer of Smith Bearing Cam ...
HR-1-XBC ; Max. Static Capacity (lbs), 6200 ; (R) Crown Radius (Inches), 12 ; (B) Roller Width Tolerance, +.000/-.005 ; (D) Roller O.D. Tolerance, +.000/-.001.
SMITH BEARING HR-1/2-XBC Cam Follower,Crowned,Heavy ...
Arrives by Thu, Dec 9 Buy SMITH BEARING HR-1/2-XBC Cam Follower,Crowned,Heavy Stud,Hex Sock at Walmart.com.Roller Type: Crowned, Hex Socket HeadStud Length: 0.625 inStud Material: Carbon SteelStud Length (In.): 0.625
Accurate Bushing Company Smith Bearing HR-1-5/8-XBC ...
Mar 20, 2022 — Smith Bearing HR-1-5/8-XBC...
Smith Bearing Hr-1-1/4-Xbc Cam Follower,Crowned ... - eBay
Details about Smith Bearing Hr-1-1/4-Xbc Cam Follower,Crowned,Heavy Stud,Hex Sock. Free Shipping on orders over $75. Be the first to write a review.Features: Cam Follower, Roller Style Heavy St...MPN: HR-1-1/4-XBCRoller Type: Crowned, Hex Socket HeadBearing Type: Needle Roller,Sealed