| No. | Brand | H | B | J | s | a | N | T | U |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| IRR-2 | SMITH | - | 46 mm | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| HR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| MCR-62-C | SMITH | - | - | 710 mm | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| BCR-1-3/4-C | SMITH | - | 10.5 mm | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| SMITH MPCR-52 Cam Follower and Track Roller - Stud Type | Lock nut:N 10; d3 max.:68.402 mm; Mass adapter sleeve assembly:0.39 kg; B:12.954 mm; Hydraulic nut:HMVC 10E; Threads per inch:18; Sleeve:S 110x1.3/4; G:49.962 mm; d:55 mm; Lock washer:W 10; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Limiting speed:8500 r/min; Basic dynamic load rating C:38 kN; Mass needle roller and cage assembly:0.067 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Basic static load rating C0:75 kN; Fw:55 mm; U:20 mm; Ew:63 mm; Reference speed:7500 r/min; Fatigue load limit Pu:9.15 kN; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH HR-3-1/4-XC Cam Follower and Track Roller - Stud Type | Hydraulic nut:HMV 52E; Mass adapter sleeve assembly:13.5 kg; B:34 mm; B1:145 mm; G:Tr 260x4; G2:M 6; G3:9 mm; d3:310 mm; A:4.2 mm; Locking device:MS 3052-48; |
| SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | Calculation factor e:0.22; B1:31 mm; Limiting speed:11000 r/min; Calculation factor Y0:2.8; db min.:43 mm; r1,2 min.:1.1 mm; d3:58 mm; B4:10 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y1:2.9; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH MYRV-10-S Cam Follower and Track Roller - Yoke Type | d:170 mm; Mass adapter sleeve assembly:9.55 kg; B:27.254 mm; Sleeve:S 134x5.15/16; B4:30.963 mm; Threads per inch:8; d3 max.:219.989 mm; Lock nut:AN 34; d1:150.813 mm; G:169.139 mm; |
| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH CR-1-1/2-BC Cam Follower and Track Roller - Stud Type | with cylindrical bore:380 min-1; Grease:5850 kN; Oil:432.570 kN; d:420 mm; D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; B:150 mm; with tapered bore:450 min-1; rs (min):5 mm; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH MCR-85-BC Cam Follower and Track Roller - Stud Type | Limiting speed:24000 r/min; da min.:7 mm; Basic dynamic load rating C:2.03 kN; ra max.:0.3 mm; D2 ≈:16.5 mm; Da max.:17 mm; Calculation factor f0:12.1; da max.:8.4 mm; D:19 mm; d2 ≈:8.5 mm; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type Video