| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; P60°:128 kN; PG:1/4 NPT; Housing:SAF 618; H2:50.8 mm; h:50.8 mm; Stabilizing ring:2 x SR-1618; Initial grease fill:481.95 g; ba:42.069 mm; A1:111.125 mm; |
| SMITH MCR-35-B Cam Follower and Track Roller - Stud Type | D:120.0000 mm; Grease Speed Rating n1:4800 rpm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:85200 N; B:29.00 mm; d:55.000 mm; Basic Static Radial Load Rating Co:60000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; |
| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH HR-3-1/4-XC Cam Follower and Track Roller - Stud Type | Hydraulic nut:HMV 52E; Mass adapter sleeve assembly:13.5 kg; B:34 mm; B1:145 mm; G:Tr 260x4; G2:M 6; G3:9 mm; d3:310 mm; A:4.2 mm; Locking device:MS 3052-48; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH CR-5/8 Cam Follower and Track Roller - Stud Type | Attainable speed for oil-air lubrication:50000 r/min; Ball diameter Dw:4.762 mm; Basic static load rating C0:9.65 kN; Calculation factor f:1.08; Static axial stiffness, preload class A:32 N/µm; d:45 mm; dn:54.2 mm; Preload class B GB:48 N; Static axial stiffness, preload class C:66 N/µm; Number of balls z:27; |
| SMITH CR-1-7/8-B-SS Cam Follower and Track Roller - Stud Type | Width Plain B:5.0 mm; Oil Speed Rating Open/Shielded n2:54000 rpm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:44000 rpm; Sealed Speed Rating n3:31000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; d:6.400 mm; |