| No. | Brand | H | B | J | s | a | N | T | U |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| MCR-85-BC | SMITH | - | - | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| PCR-5 | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| MCR-90-SC | SMITH | 50 mm | - | - | - | - | - | - | - |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:71.40 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:20.2 kg; K:6 mm; B:80 mm; Calculation factor e:0.28; Da max.:238 mm; d3:195 mm; Calculation factor Y1:2.4; Basic static load rating C0:1200 kN; d1:135 mm; r1,2 min.:2.1 mm; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type | D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; Basic Dynamic Radial Load Rating C:13000 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Seals; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; |
| SMITH YR-2 Cam Follower and Track Roller - Yoke Type | d:950 mm; B:420 mm; Dynamic (Cr):9239.1 kN; D:1250 mm; Weight:1300 ; B1:300 mm; Bearing designation:PLC 512-65 ; Pu:1575.220 kg; Static (Cor):26520 ; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH MPCR-52 Cam Follower and Track Roller - Stud Type | Lock nut:N 10; d3 max.:68.402 mm; Mass adapter sleeve assembly:0.39 kg; B:12.954 mm; Hydraulic nut:HMVC 10E; Threads per inch:18; Sleeve:S 110x1.3/4; G:49.962 mm; d:55 mm; Lock washer:W 10; |
| SMITH BCR-2-1/4-XC Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Accessories:One Shield & Snap-Ri; B:41.30 mm; Basic Static Radial Load Rating Co:88000 N; D:130.0000 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:1.50 mm; |
| SMITH MCR-72-SB Cam Follower and Track Roller - Stud Type | d:105.000 mm; Accessories:Two Shields; Sealed Speed Rating n3:2400 rpm; Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:2.00 mm; B:26.00 mm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Basic Dynamic Radial Load Rating C:79300 N; Grease Speed Rating Open/Shielded n1:4000 rpm; |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type Video