| No. | Brand | H | B | J | s | a | N | T | U |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| MCRV-22-SBC | SMITH | - | 335 mm | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| DCR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH BCR-3/4-C Cam Follower and Track Roller - Stud Type | l7 min.:50 mm; dk:60 mm; r1 min.:0.6 mm; l2 max.:217 mm; B:32 mm; d:45 mm; h:163 mm; l1 min.:92 mm; Mass rod end:2.45 kg; Basic static load rating C0:200 kN; |
| SMITH MCR-30 Cam Follower and Track Roller - Stud Type | Cap bolt, size:M 30x220; Eye bolt, size:2 x M 30; P120°:2500 kN; Oil level, max.:108 mm; Appropriate attachment bolt, size G:36 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:320 mm; ba min.:149 mm; L:880 mm; Oil level, min.:84 mm; |
| SMITH PYR-8 Cam Follower and Track Roller - Yoke Type | L:419.1 mm; Cap bolt, SAE grade:5; Housing:SAW 524; P60°:185 kN; End plug (suffix Y):EPR 14; J1:69.85 mm; A1:120.65 mm; A2:254 mm; Da:215.001 mm; J min.:336.55 mm; |
| SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:71.40 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; |
| SMITH CR-7/8-XBE Cam Follower and Track Roller - Stud Type | B:51.00 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:310.0000 mm; d:200.000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; |
| SMITH CR-5/8 Cam Follower and Track Roller - Stud Type | Attainable speed for oil-air lubrication:50000 r/min; Ball diameter Dw:4.762 mm; Basic static load rating C0:9.65 kN; Calculation factor f:1.08; Static axial stiffness, preload class A:32 N/µm; d:45 mm; dn:54.2 mm; Preload class B GB:48 N; Static axial stiffness, preload class C:66 N/µm; Number of balls z:27; |
| SMITH MCRV-40-SB Cam Follower and Track Roller - Stud Type | R1:21 mm; J7:12.5 mm; Db1:77 mm; B4:5 mm; T:42.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A1:13 mm; A:32.5 mm; N:11.5 mm; GN:1/4-28 SAE-LT; |
| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type Video
Cross Reference | Carter Bearings
CR McGill. CR RBC. CR Smith. CR Torrington. CR Osborn ... S-16-L. CR-1/2-X. CRS-8-1. CNB-16-SB. CF-1/2-SB. S-16-LW. CR-1/2-XB. CRSB-8-1 ... CR-1-1/4-XB-SS.
CR-2-1/2-XB Smith Bearing Cam Follower Hex Socket Sealed ...
Apr 21, 2020 — Stud, Hex Socket, Sealed - CR-2-1/2-XB: Track Runner Bearings - ✓ FREE DELIVERY possible on eligible purchases,Buy Smith Bearing Cam ...
smith-cam-followers-full-catalog.pdf - Accent Bearings ...
Smith Bearing® is a registered trademark of Accurate Bushing Company. ... CR-XB-SS & YR-X-SS ... four smallest size cam followers (CR-1/2, CR-.
Smith CR-2-XB-SS Stainless Steel Cam Follower Sealed
Smith CR-2-XB-SS Stainless Steel Cam Follower Sealed · Call or Chat for lead time confirm availability · Typically ships in: 1 day · Weight: 1.4 lb · Unit of ...HEX Size: 7/16Weight: 1.4 lbTypically ships in: 1 day$177.25 · In stock
Cam Follower, Stud, Screwdriver Slot, Seal - Zoro Tools
Order Smith Bearing Cam Follower, Stud, Screwdriver Slot, Seal, CR-2-X at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...Roller Type: Screwdriver Slot HeadStud Material: Carbon SteelBearing Type: Needle Roller,SealedRoller Width (In.): 1.2500$72.92 · In stock
Smith Bearing CR-2-1/4-B - Cam Follower Stud - Raptor ...
Cam Follower Stud Hex Socket Unsealed | 13W718 - Pay in EUR/USD | Delivery across Europe, Middle East, Africa / SE Asia | +44 203 287 5224 ...
Stud Mount Cam Follower Bearings - Mechanidrive - Page 7
HR-3-1/2-X, Smith Bearing Stud Mount Cam Follower. Quick view. SKU: MDX458838 ... CR-2-X-SS, Smith Bearing Stud Mount Cam Follower Bearing for. Quick view.
smith bearing cr-2-x - Cam Follower and Track Roller - BDI
SMITH BEARING SMITH BEARING. CR-2-X · 2" Roller Diameter; 1-1/4" Roller Width; Flat Roller Surface Profile; 7/8" Stud Diameter; 7/8-14 Thread Size; Standard Stud ...
Smith Bearing Company CR-2-B - Flat Cam Follower - Arctic ...
Smith Bearing Company CR-2-B - Flat Cam Follower - 2.0000 in Roller Dia, 1.2500 in Roller Width, 0.8750 in Stud Dia, 2.0000 in Stud Length, Flat Industrial ...
CR-2-1/2-XB-SS - Detail - Manufacturer of Smith Bearing Cam ...
(M) Stud Length, 2-1/4. Basic Dynamic Rating (lbs), 7,959 ... SMITH Bearing® Number, CR-2-1/2-XB-SS. HEX Size, 1/2. (P) Lube Fitting Size, 3/16.