| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | a:2.381 mm; A:69.85 mm; L:174.625 mm; N1:17.462 mm; Mass bearing unit:7.76 kg; Attachment bolt diameter G:4 x 15.875; A5:34.131 mm; A6:25.4 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Limiting speed:8500 r/min; Basic dynamic load rating C:38 kN; Mass needle roller and cage assembly:0.067 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Basic static load rating C0:75 kN; Fw:55 mm; U:20 mm; Ew:63 mm; Reference speed:7500 r/min; Fatigue load limit Pu:9.15 kN; |
| SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Basic Static Radial Load Rating Co:15000 N; d:20.000 mm; D:72.0000 mm; Sealed Speed Rating n3:7300 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:30700 N; Fillet Radius ra:1.00 mm; |
| SMITH MCRV-85-S Cam Follower and Track Roller - Stud Type | N4 max.:30 mm; Cap bolt, rec. tightening torque:600 N·m; Q180°:2100 kN; Oil level, min.:81 mm; bc:208.5 mm; H:715 mm; bb:141 mm; N1:42 mm; A1:360 mm; End cover:ETS 3176 R; |
| SMITH HR-1-3/8-XB Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating 15 B Bearing C2:296000 N; Fillet Radius ra:3.00 mm; B:174.00 mm; Grease Speed Rating n1:1800 rpm; D:280.0000 mm; Basic Static Radial Load Rating 40 AA Pair Co1:915000 N; Basic Dynamic Radial Load Rating 40 AA Pair C1:559000 N; Basic Static Radial Load Rating 15 B Bearing Co2:345000 N; d:130.000 mm; Angle Third:40 º; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type | da max.:98.3 mm; Operating clearance factor k2:0.127; B:31 mm; r1,2 min.:1.5 mm; B1:55 mm; D1 ≈:116 mm; Basic dynamic load rating C:196 kN; d3:98 mm; db min.:80 mm; D:130 mm; |
| SMITH HR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:15000 N; Accessories:Two Shields & Snap-R; B:19.00 mm; d:20.000 mm; Basic Dynamic Radial Load Rating C:30700 N; Grease Speed Rating Open/Shielded n1:10000 rpm; Sealed Speed Rating n3:7300 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; D:72.0000 mm; |
| SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; d:30.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:45700 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:One Shield; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |