| No. | Brand | H | B | J | s | a | N | T | U |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| HR-1-7/8-BC | SMITH | - | 42.00 mm | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| IRR-2 | SMITH | - | 46 mm | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| FCR-2-1/4 | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH HR-1-C Cam Follower and Track Roller - Stud Type | D:35 mm; d2:21.1 mm; Preload class B GB:150 N; Number of balls z:12; Reference grease quantity Gref:0.68 cm³; r3,4 min.:0.15 mm; Preload class C GC:300 N; Calculation factor e:0.68; Mass bearing:0.03 kg; Static axial stiffness, preload class C:99 N/µm; |
| SMITH IRR-2 Needle Non Thrust Roller Bearings | Basic dynamic load rating C:433 kN; Fatigue load limit Pu:49 kN; da min.:108 mm; Calculation factor Y1:2.8; D1 ≈:159 mm; B:46 mm; Calculation factor Y2:4.2; Da max.:168 mm; b:8.3 mm; Limiting speed:4500 r/min; |
| SMITH DCR-1-5/8 Cam Follower and Track Roller - Stud Type | B:1.25 mm; d:30 mm; M:27.5 mm; d1:38 mm; Mass lock washer:0.008 kg; d2:49 mm; f:5 mm; |
| SMITH PCR-3-1/4 Cam Follower and Track Roller - Stud Type | d:85.000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3200 rpm; D:120.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:31900 N; Oil Speed Rating Open/Shielded n2:6300 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:30000 N; Grease Speed Rating Open/Shielded n1:5300 rpm; |
| SMITH CR-7/8-B-SS Cam Follower and Track Roller - Stud Type | Ca:198 mm; Adapter sleeve:SNP 3072x13.7/16; Cap bolt, rec. tightening torque:400 N·m; Appropriate attachment bolt, size G:36 mm; Q120°:2860 kN; H:631 mm; N:50 mm; H2:115 mm; A2:365 mm; Q150°:1650 kN; |
| SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | Bearing designation:634 ; Da:13.4 max; B:5 mm; Grease:35 000 min-1; D:16 mm; rs:0.3 mm; da:6.2 min; Pu:0.031 kN; ra:0.3 max; Oil:42 000 min-1; |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH MYRV-10-S Cam Follower and Track Roller - Yoke Type | d:170 mm; Mass adapter sleeve assembly:9.55 kg; B:27.254 mm; Sleeve:S 134x5.15/16; B4:30.963 mm; Threads per inch:8; d3 max.:219.989 mm; Lock nut:AN 34; d1:150.813 mm; G:169.139 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
| SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type | da max.:98.3 mm; Operating clearance factor k2:0.127; B:31 mm; r1,2 min.:1.5 mm; B1:55 mm; D1 ≈:116 mm; Basic dynamic load rating C:196 kN; d3:98 mm; db min.:80 mm; D:130 mm; |
| SMITH VCR-8-1/2 Cam Follower and Track Roller - Stud Type | Mass bearing:1.13 kg; a:105 mm; N:8.8 mm; Attainable speed:4300 r/min; r1,2 min.:0.3 mm; ra max.:0.3 mm; r3,4 min.:0.6 mm; Required attachment bolt size (DIN 912):M8; Preload:2750 N; Static axial stiffnes:930 N/µm; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
SMITH MCR-85-BC Cam Follower and Track Roller - Stud Type Video