| No. | Brand | H | B | J | s | a | N | T | U |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| BCR-2-1/4-XC | SMITH | - | 41.30 mm | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| DCR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
| CR-11/16-XBC | SMITH | 551 mm | - | - | 16 mm | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| MUTD-50 | SMITH | - | - | - | - | - | - | - | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-BC | SMITH | - | 42.00 mm | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| VCR-8-1/2 | SMITH | - | - | - | - | 105 mm | 8.8 mm | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |
| SMITH CR-7/8-XBE Cam Follower and Track Roller - Stud Type | B:51.00 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:310.0000 mm; d:200.000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; |
| SMITH CR-3-1/4-XBC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:470 kg; d2 ≈:500 mm; Limiting speed:670 r/min; Da max.:694 mm; G1:44 mm; Calculation factor Y2:2.9; r1,2 min.:6 mm; G:Tr 420x5; B1:302 mm; Calculation factor Y0:1.8; |
| SMITH BCR-3-XC Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; B:66.70 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:No Shield, no Seal; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; |
| SMITH FCR-4-1/2 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:216000 N; Oil Speed Rating Open/Shielded n2:2700 rpm; Fillet Radius ra:2.50 mm; D:240.0000 mm; Basic Static Radial Load Rating Co:250000 N; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:One Shield; B:50.00 mm; |
| SMITH CR-1-7/8-B-SS Cam Follower and Track Roller - Stud Type | Width Plain B:5.0 mm; Oil Speed Rating Open/Shielded n2:54000 rpm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:44000 rpm; Sealed Speed Rating n3:31000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; d:6.400 mm; |
| SMITH HR-1-5/8-X Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:15600 N; Oil Speed Rating n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:4650 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; d:30.000 mm; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
| SMITH CR-7/8-B-SS Cam Follower and Track Roller - Stud Type | Ca:198 mm; Adapter sleeve:SNP 3072x13.7/16; Cap bolt, rec. tightening torque:400 N·m; Appropriate attachment bolt, size G:36 mm; Q120°:2860 kN; H:631 mm; N:50 mm; H2:115 mm; A2:365 mm; Q150°:1650 kN; |
| SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type | da max.:98.3 mm; Operating clearance factor k2:0.127; B:31 mm; r1,2 min.:1.5 mm; B1:55 mm; D1 ≈:116 mm; Basic dynamic load rating C:196 kN; d3:98 mm; db min.:80 mm; D:130 mm; |
SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type Video
smith bearing cr-1-3/4-ss - Cam Follower and Track Roller - BDI
1-3/4" Roller Diameter; 1" Roller Width; Flat Roller Surface Profile; 3/4" Stud Diameter; 3/4-16 Thread Size; Standard Stud Stud Profile; Open Enclosure; ...
Cam Follower, Std Stud, Sealed, SS - Zoro Tools
Order Smith Bearing Cam Follower, Std Stud, Sealed, SS, CR-1-3/4-XB-SS at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...Bearing Type: Needle Roller,SealedStud Length (In.): 1.750Zoro #: G4080684Stud Type: Concentric$152.42 · Free delivery · In stock
CR-1-1/4-XB-SS Smith Bearing | Cam Follower Standard Stud ...
CR-1-1/4-XB-SS | Cam Follower Standard Stud Sealed Stainless Steel | 13G135 - Pay in GBP | Fast delivery across the UK and Channel Islands | 0203 287 5224 ...Stud Material: Stainless SteelStud Length: 1.25"Bearing Type: Needle Roller,SealedRoller Type: Hex Socket Head
CR-1-3/4-XB-SS 1-3/4" Roller OD x 1" Bore Size 1-3/4 ...
Manufacturer Part No. CR-1-3/4-XB-SS. UNSPSC, 31171505. Manufacturer, Accurate Bushing Company. Brand, Smith Bearing®.Type: Stud Track RollerManufacturer: Accurate Bushing CompanyStud Length: 1-3/4"Material: Stainless Steel
Buying Guide | Smith Bearing CR-1 1/4 Cam Follower Needle ...
Smith Bearing CR-1 3/4-X-SS Cam Follower Needle Roller Bearing, Stud Type with Screwdriver Slot, Stainless Steel, Sealed, 1.750".
CR-1-3/4-XB-SS - Detail - Manufacturer of Smith Bearing Cam ...
SMITH Bearing® Number, CR-1-3/4-XB-SS. HEX Size, 5/16. (P) Lube Fitting Size, 3/16. (H) Oil Hole Dia. 3/32. (N) Oil Hole Location, 7/16. Recom. Bore .750.
CR-1-3/4-XB-SS | CR Series Stainless Steel Stud Cam Follower
Shop Smith Bearing CR-1-3/4-XB-SS at Applied.com, which includes; Cam Follower, 1 3/4" OD Straight Roller, 3/4" Standard Stud, 7/8-14 Thread, Hex Hole End, ...
Smith CR-1-3/4-XB-SS Stainless Steel Cam Follower Sealed
Smith CR-1-3/4-XB-SS Stainless Steel Cam Follower Sealed · Call or Chat for lead time confirm availability · Typically ships in: 1 day · Weight: 0.9 lb · Unit of ...Brand: Smith BearingsWeight: 0.9 lb(B) Roller Width: 1.000HEX Size: 5/16$127.62 · Free delivery · In stock
Smith Bearing CR-1 3/4-SS Cam Follower Needle Roller ...
Smith Bearing CR-1 3/4-SS Cam Follower Needle Roller Bearing, Stud Type with Screwdriver Slot, Stainless Steel, Unsealed, 1.750": Amazon.com: Industrial ...Material: Stainless SteelItem Weight: 2 PoundsBearing Type: Roller Bearing$144.93 · Out of stock
SMITH SS BEARING CR-1-3/4-XB-SS-131 Cam Follower ...
Smith Bearings CR-1/2-XB-SS Cam Follower, Std Stud, Sealed, Stainless Steel nib. ILS 237.07 ... thumbnail 1 - SMITH SS BEARING CR-1-3/4-XB- ...