| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH MPCR-52 Cam Follower and Track Roller - Stud Type | Lock nut:N 10; d3 max.:68.402 mm; Mass adapter sleeve assembly:0.39 kg; B:12.954 mm; Hydraulic nut:HMVC 10E; Threads per inch:18; Sleeve:S 110x1.3/4; G:49.962 mm; d:55 mm; Lock washer:W 10; |
| SMITH MYR-10-C Cam Follower and Track Roller - Yoke Type | R1:95.25 mm; P90°:236 kN; N1:28.575 mm; A2:215.9 mm; Initial grease fill:623.7 g; Adapter sleeve assembly:SNW 30x5.5/16; P120°:149 kN; Da:269.999 mm; Labyrinth ring:2 x LOR 127; PG:1/4 NPT; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | a:2.381 mm; A:69.85 mm; L:174.625 mm; N1:17.462 mm; Mass bearing unit:7.76 kg; Attachment bolt diameter G:4 x 15.875; A5:34.131 mm; A6:25.4 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; |
| SMITH DCR-6 Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Fillet Radius ra:2.00 mm; d:380.000 mm; D:480.0000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
| SMITH BCR-2-1/4-XC Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Accessories:One Shield & Snap-Ri; B:41.30 mm; Basic Static Radial Load Rating Co:88000 N; D:130.0000 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:1.50 mm; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type | C1 max.:39 mm; B:44 mm; Material constant KM:330; Mass rod end:6.2 kg; l3 min.:70 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:137 mm; l7 min.:70 mm; G:M 52x3; dk:80 mm; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
| SMITH CR-1-1/2-BC Cam Follower and Track Roller - Stud Type | with cylindrical bore:380 min-1; Grease:5850 kN; Oil:432.570 kN; d:420 mm; D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; B:150 mm; with tapered bore:450 min-1; rs (min):5 mm; |