| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
| SMITH MYR-15-SC Cam Follower and Track Roller - Yoke Type | Effective load carrying cross section A:28120 mm²; d:190 mm; D:210 mm; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:200 N/mm²; Mass bushing:1.76 kg; B:150 mm; Coefficient of friction µ min.:0.03; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; |
| SMITH MYRV-8-S Cam Follower and Track Roller - Yoke Type | Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:95000 N; d:60.000 mm; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH MCRV-85-S Cam Follower and Track Roller - Stud Type | N4 max.:30 mm; Cap bolt, rec. tightening torque:600 N·m; Q180°:2100 kN; Oil level, min.:81 mm; bc:208.5 mm; H:715 mm; bb:141 mm; N1:42 mm; A1:360 mm; End cover:ETS 3176 R; |
| SMITH PCR-3-1/4 Cam Follower and Track Roller - Stud Type | d:85.000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3200 rpm; D:120.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:31900 N; Oil Speed Rating Open/Shielded n2:6300 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:30000 N; Grease Speed Rating Open/Shielded n1:5300 rpm; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH MYR-10-C Cam Follower and Track Roller - Yoke Type | R1:95.25 mm; P90°:236 kN; N1:28.575 mm; A2:215.9 mm; Initial grease fill:623.7 g; Adapter sleeve assembly:SNW 30x5.5/16; P120°:149 kN; Da:269.999 mm; Labyrinth ring:2 x LOR 127; PG:1/4 NPT; |
| SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type | C1 max.:39 mm; B:44 mm; Material constant KM:330; Mass rod end:6.2 kg; l3 min.:70 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:137 mm; l7 min.:70 mm; G:M 52x3; dk:80 mm; |
| SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; d:30.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:45700 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:One Shield; |