| No. | Brand | H | B | J | s | a | N | T | U |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
| MUTD-50 | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| PYR-8 | SMITH | - | - | - | - | - | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| MCR-85-BC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XC | SMITH | - | 41.30 mm | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| SMITH DCR-6 Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Fillet Radius ra:2.00 mm; d:380.000 mm; D:480.0000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type | Mass inner ring:0.084 kg; F:45 mm; d:40 mm; r, r1,2 min.:0.3 mm; B:30 mm; |
| SMITH CR-7/8-B Cam Follower and Track Roller - Stud Type | RG:1/4 NPT; da:60.325 mm; Cap bolt:2 x 1/2-13 UNC; Da:130 mm; P90°:45.4 kN; R1:46.038 mm; P150°:25.4 kN; A1:79.375 mm; P180°:30.2 kN; Initial grease fill:68.04 g; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH YR-2 Cam Follower and Track Roller - Yoke Type | d:950 mm; B:420 mm; Dynamic (Cr):9239.1 kN; D:1250 mm; Weight:1300 ; B1:300 mm; Bearing designation:PLC 512-65 ; Pu:1575.220 kg; Static (Cor):26520 ; |
| SMITH MYR-10-C Cam Follower and Track Roller - Yoke Type | R1:95.25 mm; P90°:236 kN; N1:28.575 mm; A2:215.9 mm; Initial grease fill:623.7 g; Adapter sleeve assembly:SNW 30x5.5/16; P120°:149 kN; Da:269.999 mm; Labyrinth ring:2 x LOR 127; PG:1/4 NPT; |
| SMITH CR-7/8-B-SS Cam Follower and Track Roller - Stud Type | Ca:198 mm; Adapter sleeve:SNP 3072x13.7/16; Cap bolt, rec. tightening torque:400 N·m; Appropriate attachment bolt, size G:36 mm; Q120°:2860 kN; H:631 mm; N:50 mm; H2:115 mm; A2:365 mm; Q150°:1650 kN; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
SMITH YR-2-X-SS Cam Follower and Track Roller - Yoke Type Video