| No. | Brand | H | B | J | s | a | N | T | U |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| CR-2 | SMITH | - | 13.5 mm | - | - | - | - | - | - |
| MYR-15-SC | SMITH | - | 150 mm | - | - | - | - | - | - |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| CR-1/2-A-C | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH BCR-1-3/4-C Cam Follower and Track Roller - Stud Type | d1:105 mm; B:10.5 mm; d:55 mm; Mass shaft washer:0.5 kg; r1,2 min.:1.1 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH YR-2 Cam Follower and Track Roller - Yoke Type | d:950 mm; B:420 mm; Dynamic (Cr):9239.1 kN; D:1250 mm; Weight:1300 ; B1:300 mm; Bearing designation:PLC 512-65 ; Pu:1575.220 kg; Static (Cor):26520 ; |
| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH MCR-52-SC Cam Follower and Track Roller - Stud Type | Axial load factor Y:0.4; r3,4 min.:0.6 mm; Basic static load rating C0:49 kN; Da max.:55.9 mm; Limiting value e:0.3; Fatigue load limit Pu:6.1 kN; B:20 mm; da min.:35.3 mm; db min.:43 mm; Limiting speed:14000 r/min; |
| SMITH BCR-3-XC Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; B:66.70 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:No Shield, no Seal; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH YAF-04 Cam Follower and Track Roller - Yoke Type | H:147.637 mm; End plug (suffix Y):EPR 6; h:27.781 mm; Pa:6.09 kN; PG:1/8 NPT; Adapter sleeve assembly:SNW 13x2.1/8; da:53.975 mm; P150°:16 kN; P120°:17.8 kN; A2:184.15 mm; |
| SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type | J:600 mm; H1:240 mm; db:280 mm; N:42 mm; H2:95 mm; Labyrinth seal:2 x TS 60; bc:141.5 mm; Initial grease fill, 40%:3.9 kg; ba max.:136 mm; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type Video