| No. | Brand | H | B | J | s | a | N | T | U |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| VCR-8-1/2 | SMITH | - | - | - | - | 105 mm | 8.8 mm | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-C | SMITH | - | 32 mm | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| PYR-7 | SMITH | - | 9 mm | - | - | 13.6 mm | - | - | - |
| CR-1/2-A-C | SMITH | - | - | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MUTD-50 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| MCR-62-C | SMITH | - | - | 710 mm | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-3-1/4-XBC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:470 kg; d2 ≈:500 mm; Limiting speed:670 r/min; Da max.:694 mm; G1:44 mm; Calculation factor Y2:2.9; r1,2 min.:6 mm; G:Tr 420x5; B1:302 mm; Calculation factor Y0:1.8; |
| SMITH MCRV-30-SB Cam Follower and Track Roller - Stud Type | B:15 mm; b:7 mm; Mass lock nut:0.26 kg; Grub (set) screw size:M6; d1:76 mm; G:M 65x2; d3:85 mm; Associated spanner:HN 12-13; Axial static load carrying capacity:108 kN; B3:3 mm; |
| SMITH BCR-3/4-C Cam Follower and Track Roller - Stud Type | l7 min.:50 mm; dk:60 mm; r1 min.:0.6 mm; l2 max.:217 mm; B:32 mm; d:45 mm; h:163 mm; l1 min.:92 mm; Mass rod end:2.45 kg; Basic static load rating C0:200 kN; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH PCR-3-1/4 Cam Follower and Track Roller - Stud Type | d:85.000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3200 rpm; D:120.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:31900 N; Oil Speed Rating Open/Shielded n2:6300 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:30000 N; Grease Speed Rating Open/Shielded n1:5300 rpm; |
| SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |
| SMITH MCR-72-SB Cam Follower and Track Roller - Stud Type | d:105.000 mm; Accessories:Two Shields; Sealed Speed Rating n3:2400 rpm; Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:2.00 mm; B:26.00 mm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Basic Dynamic Radial Load Rating C:79300 N; Grease Speed Rating Open/Shielded n1:4000 rpm; |
| SMITH HR-1-5/8-X Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:15600 N; Oil Speed Rating n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:4650 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; d:30.000 mm; |
| SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
SMITH HR-1-C Cam Follower and Track Roller - Stud Type Video