| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
| SMITH DCR-6 Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Fillet Radius ra:2.00 mm; d:380.000 mm; D:480.0000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |
| SMITH HR-4-XC Cam Follower and Track Roller - Stud Type | J:123.825 mm; N1:17.462 mm; A6:19.05 mm; S:0.794 mm; Limiting speed:3700 r/min; Attachment bolt diameter G:4 x 15.875; Basic dynamic load rating C:125 kN; L:4 x 158.75; A:60.325 mm; A5:30.956 mm; |
| SMITH HR-1-3/8-XB Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating 15 B Bearing C2:296000 N; Fillet Radius ra:3.00 mm; B:174.00 mm; Grease Speed Rating n1:1800 rpm; D:280.0000 mm; Basic Static Radial Load Rating 40 AA Pair Co1:915000 N; Basic Dynamic Radial Load Rating 40 AA Pair C1:559000 N; Basic Static Radial Load Rating 15 B Bearing Co2:345000 N; d:130.000 mm; Angle Third:40 º; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH MCR-26-B Cam Follower and Track Roller - Stud Type | ra max.:5 mm; Calculation factor kr:0.3; das:553 mm; Basic dynamic load rating C:3800 kN; s max.:16 mm; Fatigue load limit Pu:570 kN; B:167 mm; Calculation factor Y:0.4; Da max.:697 mm; Calculation factor e:0.3; |
| SMITH IRR-2 Needle Non Thrust Roller Bearings | Basic dynamic load rating C:433 kN; Fatigue load limit Pu:49 kN; da min.:108 mm; Calculation factor Y1:2.8; D1 ≈:159 mm; B:46 mm; Calculation factor Y2:4.2; Da max.:168 mm; b:8.3 mm; Limiting speed:4500 r/min; |
| SMITH HR-1-5/8-X Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:15600 N; Oil Speed Rating n2:13000 rpm; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:4650 N; D:62.0000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; d:30.000 mm; |
| SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |