| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH BCR-1-BC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:81900 N; B:53.98 mm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; |
| SMITH PCR-5 Cam Follower and Track Roller - Stud Type | Housing:SAW 544; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Stabilizing ring:SR-44-38; H2:95.25 mm; Ca:153.797 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; A2:304.8 mm; End plug (suffix Y):EPR 23; |
| SMITH BCR-2-1/4-XC Cam Follower and Track Roller - Stud Type | Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Accessories:One Shield & Snap-Ri; B:41.30 mm; Basic Static Radial Load Rating Co:88000 N; D:130.0000 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:1.50 mm; |
| SMITH CR-5/8 Cam Follower and Track Roller - Stud Type | Attainable speed for oil-air lubrication:50000 r/min; Ball diameter Dw:4.762 mm; Basic static load rating C0:9.65 kN; Calculation factor f:1.08; Static axial stiffness, preload class A:32 N/µm; d:45 mm; dn:54.2 mm; Preload class B GB:48 N; Static axial stiffness, preload class C:66 N/µm; Number of balls z:27; |
| SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type | D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; Basic Dynamic Radial Load Rating C:13000 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Seals; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; |