| No. | Brand | H | B | J | s | a | N | T | U |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| HR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-22-SBC | SMITH | - | 335 mm | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type | da max.:98.3 mm; Operating clearance factor k2:0.127; B:31 mm; r1,2 min.:1.5 mm; B1:55 mm; D1 ≈:116 mm; Basic dynamic load rating C:196 kN; d3:98 mm; db min.:80 mm; D:130 mm; |
| SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type | J:600 mm; H1:240 mm; db:280 mm; N:42 mm; H2:95 mm; Labyrinth seal:2 x TS 60; bc:141.5 mm; Initial grease fill, 40%:3.9 kg; ba max.:136 mm; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |
| SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | Calculation factor e:0.22; B1:31 mm; Limiting speed:11000 r/min; Calculation factor Y0:2.8; db min.:43 mm; r1,2 min.:1.1 mm; d3:58 mm; B4:10 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y1:2.9; |
| SMITH MYR-15-SC Cam Follower and Track Roller - Yoke Type | Effective load carrying cross section A:28120 mm²; d:190 mm; D:210 mm; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:200 N/mm²; Mass bushing:1.76 kg; B:150 mm; Coefficient of friction µ min.:0.03; Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; |
| SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | Bearing designation:634 ; Da:13.4 max; B:5 mm; Grease:35 000 min-1; D:16 mm; rs:0.3 mm; da:6.2 min; Pu:0.031 kN; ra:0.3 max; Oil:42 000 min-1; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
SMITH MCR-35-B Cam Follower and Track Roller - Stud Type Video