| No. | Brand | H | B | J | s | a | N | T | U |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| MCRV-85-S | SMITH | 715 mm | - | - | - | - | - | - | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| MYR-15-SC | SMITH | - | 150 mm | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| PCR-5 | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MCR-30 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
| SMITH HR-4-XC Cam Follower and Track Roller - Stud Type | J:123.825 mm; N1:17.462 mm; A6:19.05 mm; S:0.794 mm; Limiting speed:3700 r/min; Attachment bolt diameter G:4 x 15.875; Basic dynamic load rating C:125 kN; L:4 x 158.75; A:60.325 mm; A5:30.956 mm; |
| SMITH MPCR-52 Cam Follower and Track Roller - Stud Type | Lock nut:N 10; d3 max.:68.402 mm; Mass adapter sleeve assembly:0.39 kg; B:12.954 mm; Hydraulic nut:HMVC 10E; Threads per inch:18; Sleeve:S 110x1.3/4; G:49.962 mm; d:55 mm; Lock washer:W 10; |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH MFCR-40 Cam Follower and Track Roller - Stud Type | D:47.0000 mm; Oil Speed Rating n2:13000 rpm; Basic Static Radial Load Rating Co:17000 N; Fillet Radius ra:1.00 mm; Accessories:Two Seals; B:20.60 mm; Grease Speed Rating n1:9000 rpm; Sealed Speed Rating n3:9000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:20500 N; |
| SMITH PYR-8 Cam Follower and Track Roller - Yoke Type | L:419.1 mm; Cap bolt, SAE grade:5; Housing:SAW 524; P60°:185 kN; End plug (suffix Y):EPR 14; J1:69.85 mm; A1:120.65 mm; A2:254 mm; Da:215.001 mm; J min.:336.55 mm; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type | Mass inner ring:0.084 kg; F:45 mm; d:40 mm; r, r1,2 min.:0.3 mm; B:30 mm; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH HR-1/2-B Cam Follower and Track Roller - Stud Type | T:292.1 mm; Comparative axial load rating CFa:153 kN; B:292.1 mm; Basic dynamic load rating C:3910 kN; d:347.662 mm; Calculation factor Y1:2; d1 ≈:372 mm; Design variant/feature:TQOSN/GWSI; Comparative radial load rating CF:950 kN; r1,2 min.:1 mm; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
SMITH CR-5/8 Cam Follower and Track Roller - Stud Type Video