| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:20.2 kg; K:6 mm; B:80 mm; Calculation factor e:0.28; Da max.:238 mm; d3:195 mm; Calculation factor Y1:2.4; Basic static load rating C0:1200 kN; d1:135 mm; r1,2 min.:2.1 mm; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH VCR-8-1/2 Cam Follower and Track Roller - Stud Type | Mass bearing:1.13 kg; a:105 mm; N:8.8 mm; Attainable speed:4300 r/min; r1,2 min.:0.3 mm; ra max.:0.3 mm; r3,4 min.:0.6 mm; Required attachment bolt size (DIN 912):M8; Preload:2750 N; Static axial stiffnes:930 N/µm; |
| SMITH FCR-4-1/2 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:216000 N; Oil Speed Rating Open/Shielded n2:2700 rpm; Fillet Radius ra:2.50 mm; D:240.0000 mm; Basic Static Radial Load Rating Co:250000 N; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:One Shield; B:50.00 mm; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH YR-4-X Cam Follower and Track Roller - Yoke Type | B:33.00 mm; Sealed Speed Rating n3:1500 rpm; Accessories:One Seal; d:180.000 mm; Basic Static Radial Load Rating Co:132000 N; Basic Dynamic Radial Load Rating C:119000 N; Grease Speed Rating Open/Shielded n1:2200 rpm; Oil Speed Rating Open/Shielded n2:2800 rpm; D:250.0000 mm; Fillet Radius ra:2.00 mm; |
| SMITH DYR-2-1/2 Cam Follower and Track Roller - Yoke Type | d1 ≈:648.1 mm; Calculation factor A:26.9; r3,4 min.:3 mm; Reference speed:700 r/min; d:560 mm; Calculation factor e:0.8; Calculation factor Y1:0.78; Calculation factor Y0:0.66; Db max.:807 mm; Calculation factor Y2:1.24; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |