| No. | Brand | H | B | J | s | a | N | T | U |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-C | SMITH | - | 32 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| DCR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| CR-11/16-XBC | SMITH | 551 mm | - | - | 16 mm | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| PCR-5 | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| CR-1/2-A-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
| SMITH YAG-08 Cam Follower and Track Roller - Yoke Type | d3 max.:171.577 mm; B1:95.301 mm; B:22.479 mm; d1:111.125 mm; Lock washer:W 26; Lock nut:AN 26; G:129.692 mm; Mass adapter sleeve assembly:4.4 kg; Sleeve:S 26x4.3/8; Hydraulic nut:HMVC 26E; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:20.2 kg; K:6 mm; B:80 mm; Calculation factor e:0.28; Da max.:238 mm; d3:195 mm; Calculation factor Y1:2.4; Basic static load rating C0:1200 kN; d1:135 mm; r1,2 min.:2.1 mm; |
| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Limiting speed:8500 r/min; Basic dynamic load rating C:38 kN; Mass needle roller and cage assembly:0.067 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Basic static load rating C0:75 kN; Fw:55 mm; U:20 mm; Ew:63 mm; Reference speed:7500 r/min; Fatigue load limit Pu:9.15 kN; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type | C1 max.:39 mm; B:44 mm; Material constant KM:330; Mass rod end:6.2 kg; l3 min.:70 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:137 mm; l7 min.:70 mm; G:M 52x3; dk:80 mm; |
| SMITH BCR-1-BC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:81900 N; B:53.98 mm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; |
SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type Video