| No. | Brand | H | B | J | s | a | N | T | U |
| MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-85-S | SMITH | 715 mm | - | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| MYR-15-SC | SMITH | - | 150 mm | - | - | - | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-3/4-C | SMITH | - | 10.5 mm | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| PYR-7 | SMITH | - | 9 mm | - | - | 13.6 mm | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type | J:600 mm; H1:240 mm; db:280 mm; N:42 mm; H2:95 mm; Labyrinth seal:2 x TS 60; bc:141.5 mm; Initial grease fill, 40%:3.9 kg; ba max.:136 mm; |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH DCR-1-5/8 Cam Follower and Track Roller - Stud Type | B:1.25 mm; d:30 mm; M:27.5 mm; d1:38 mm; Mass lock washer:0.008 kg; d2:49 mm; f:5 mm; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH HR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass roller and cage thrust assembly:9.42 kg; d:240 mm; D:340 mm; Limiting speed:800 r/min; Roller and cage thrust assembly:K 81248 M; Fatigue load limit Pu:390 kN; Dw:32 mm; Reference speed:400 r/min; Housing washer:GS 81248; Basic dynamic load rating C:1100 kN; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH CR-3-1/4-XBC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:470 kg; d2 ≈:500 mm; Limiting speed:670 r/min; Da max.:694 mm; G1:44 mm; Calculation factor Y2:2.9; r1,2 min.:6 mm; G:Tr 420x5; B1:302 mm; Calculation factor Y0:1.8; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:97500 N; Fillet Radius ra:0.10 in; B:1.1250 in; Basic Static Radial Load Rating Co:129000 N; d:6.250 in; D:8.5000 in; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:0.040 in; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
SMITH BCR-1-XBC Cam Follower and Track Roller - Stud Type Video