| No. | Brand | H | B | J | s | a | N | T | U |
| MCRV-85-S | SMITH | 715 mm | - | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-XBC | SMITH | - | 49 mm | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| DCR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| MCR-62-C | SMITH | - | - | 710 mm | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| IRR-2 | SMITH | - | 46 mm | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| HR-1-7/8-BC | SMITH | - | 42.00 mm | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH DYR-1-1/4 Cam Follower and Track Roller - Yoke Type | da max.:98.3 mm; Operating clearance factor k2:0.127; B:31 mm; r1,2 min.:1.5 mm; B1:55 mm; D1 ≈:116 mm; Basic dynamic load rating C:196 kN; d3:98 mm; db min.:80 mm; D:130 mm; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
| SMITH VCR-8-1/2 Cam Follower and Track Roller - Stud Type | Mass bearing:1.13 kg; a:105 mm; N:8.8 mm; Attainable speed:4300 r/min; r1,2 min.:0.3 mm; ra max.:0.3 mm; r3,4 min.:0.6 mm; Required attachment bolt size (DIN 912):M8; Preload:2750 N; Static axial stiffnes:930 N/µm; |
| SMITH YAG-08 Cam Follower and Track Roller - Yoke Type | d3 max.:171.577 mm; B1:95.301 mm; B:22.479 mm; d1:111.125 mm; Lock washer:W 26; Lock nut:AN 26; G:129.692 mm; Mass adapter sleeve assembly:4.4 kg; Sleeve:S 26x4.3/8; Hydraulic nut:HMVC 26E; |
| SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
| SMITH CR-11/16-XBC Cam Follower and Track Roller - Stud Type | H:551 mm; A1:280 mm; J6:740 mm; Eye bolt, size:2 x M 24; s:16 mm; P0°:4000 kN; Oil seal:2 x TSD 3156 U; A:315 mm; Oil level, max.:92 mm; H2:105 mm; |
| SMITH CR-1-7/8-B-SS Cam Follower and Track Roller - Stud Type | Width Plain B:5.0 mm; Oil Speed Rating Open/Shielded n2:54000 rpm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:44000 rpm; Sealed Speed Rating n3:31000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; d:6.400 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type Video