No. | Brand | H | B | J | s | a | N | T | U |
MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
BCR-1-XB | SMITH | - | 19.00 mm | - | - | - | - | - | - |
MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
VCR-8-1/2 | SMITH | - | - | - | - | 105 mm | 8.8 mm | - | - |
MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
HR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
MCR-30 | SMITH | - | - | - | - | - | - | - | - |
MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
MYR-10-C | SMITH | - | - | - | - | - | - | - | - |
CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
SMITH MCR-30 Cam Follower and Track Roller - Stud Type | Cap bolt, size:M 30x220; Eye bolt, size:2 x M 30; P120°:2500 kN; Oil level, max.:108 mm; Appropriate attachment bolt, size G:36 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H1:320 mm; ba min.:149 mm; L:880 mm; Oil level, min.:84 mm; |
SMITH YR-2-1/4-C Cam Follower and Track Roller - Yoke Type | Weight W:0.55 kg; Outher Width C:19 mm; Outside Diameter D2:80 mm; Diameter D3:51.80 mm; Set Screw Size SSS:M8*1*7; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:30700 N; Bore Diameter D:40 mm; Max Fillet Rad. MFR:1.0 mm; Dimension S:19.0 mm; |
SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
SMITH BCR-3 Cam Follower and Track Roller - Stud Type | B1:296 mm; G:Tr 600x6; Limiting speed:630 r/min; ra max.:5 mm; Basic static load rating C0:14600 kN; Da max.:797 mm; b:22.3 mm; Calculation factor e:0.28; Fatigue load limit Pu:980 kN; Basic dynamic load rating C:7621 kN; |
SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |
SMITH FCR-2-1/4 Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:88400 N; Oil Speed Rating n2:19000 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:61000 N; B:29.00 mm; Fillet Radius rb:1.00 mm; d:55.000 mm; Fillet Radius ra:2.00 mm; |
SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
SMITH MYRV-10-S Cam Follower and Track Roller - Yoke Type | d:170 mm; Mass adapter sleeve assembly:9.55 kg; B:27.254 mm; Sleeve:S 134x5.15/16; B4:30.963 mm; Threads per inch:8; d3 max.:219.989 mm; Lock nut:AN 34; d1:150.813 mm; G:169.139 mm; |
SMITH DCR-6 Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Fillet Radius ra:2.00 mm; d:380.000 mm; D:480.0000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; B:46.00 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; |
SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; P60°:128 kN; PG:1/4 NPT; Housing:SAF 618; H2:50.8 mm; h:50.8 mm; Stabilizing ring:2 x SR-1618; Initial grease fill:481.95 g; ba:42.069 mm; A1:111.125 mm; |
SMITH HR-1-1/2-XBC Cam Follower and Track Roller - Stud Type Video
Smith Bearings
Smith Bearing is a registered trademark of Accurate Bushing Company. With over 50 years experience in ... Model, HR-1-1/2-XB ... Model, CR-1-XBC-SS ...
Smith Bearing HR-1 1/2-XBC Cam Follower Needle Roller ...
This item: Smith Bearing HR-1 1/2-XBC Cam Follower Needle Roller Bearing, Crowned-Heavy Stud with Hex-Drive Socket, Sealed, 1.500" · Linear Motion Rods 2PCS 8mmx ...Material: Carbon SteelItem Dimensions LxWxH: 1.7 x 1.7 x 2.6 inchesItem Diameter: 1.5 inchesItem Weight: 0.01 Pounds$50.69 · Out of stock
SMI HR 1-1/2 XBC - Cam Follower and Track Roller - Stud Type
1-1/2" Roller Diameter; 7/8" Roller Width; Crowned Roller Surface Profile; 7/8" Stud Diameter; 7/8-14 Thread Size; Heavy Stud Stud Profile; Sealed Enclosure ...
SMITH BEARING Cam Follower: 3.25 in Roller Dia., 1.75 in ...
Item # 11Y164; Mfr. Model # HR-3-1/4-XBC; UNSPSC # 31171505; Catalog Page # N/A. Country of Origin Varies. Country of Origin is subject to change.Bearing Type: Needle Roller, SealedStud Type: ConcentricStud Material: Carbon SteelDynamic Load Capacity (Lb.): 10,050 lb$316.02 · In stock
SMITH BEARING HR-2-1/2-XBC Cam Follower and Track Roller
Looking for SMITH BEARING HR-2-1/2-XBC BEARING? Price $89.68 + Free Shipping! Easy online ordering with 24/7 expert product support.Roller Width: 1.5 Inch | 38.1 MillimeterSeal Type: SealedOther Features: Full Complement | Threaded E...Thread Size: 1-1/4-12
HR-2-1/2-XBC Cam Followers - Smith & Lily Interchange
Smith Part No. HR-2-1/2-XBC. LILY Part No. LHR-2-1/2-XBC. Cross Reference, Smith. System of Measurement, Inch. Roller style, Stud Type. Roller Dia, 2.500".Roller style: Stud TypeStud Length: 2.250"Roller Width: 1.500"System of Measurement: Inch
Smith Bearing Hr-1-1/2-Xbc Cam Follower,Crowned,Heavy ...
Details about Smith Bearing Hr-1-1/2-Xbc Cam Follower,Crowned,Heavy Stud,Hex Sock. Free Shipping on orders over $75. Be the first to write a review.
Cam Follower, Crowned, Heavy Stud, Hex Sock - Zoro Tools
Smith Bearing #HR-1-1/2-XBC Specifications ; Roller Style: Heavy Stud ; Roller Shape: Crowned ; Face Design: Hex Socket ; Roller Dia.: 1.5 in ; Roller Width: 0.875 ...Roller Type: Crowned, Hex Socket HeadBearing Type: Needle Roller,SealedStud Material: Carbon SteelStud Length: 1.5 in
Smith Bearing HR-1-1/2-X | Cam Follower Heavy Stud Sealed
Cam Follower Heavy Stud Sealed | 11Y014 - Pay in EUR/USD | Delivery across Europe, Middle East, Africa / SE Asia | +44 203 287 5224 ...Bearing Type: Needle Roller,SealedStud Length: 1.5"Stud Material: Carbon SteelRoller Type: Screwdriver Slot Head
HR-1/2-XBC - Detail - Manufacturer of Smith Bearing Cam ...
HR-1/2-XBC ; (M) Stud Length, 5/8 ; Basic Dynamic Rating (lbs), 970 ; Max. Static Capacity (lbs), 1590 ; (R) Crown Radius (Inches), 7.