| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Basic Static Radial Load Rating Co:15000 N; d:20.000 mm; D:72.0000 mm; Sealed Speed Rating n3:7300 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:30700 N; Fillet Radius ra:1.00 mm; |
| SMITH CR-1-1/2-BC Cam Follower and Track Roller - Stud Type | with cylindrical bore:380 min-1; Grease:5850 kN; Oil:432.570 kN; d:420 mm; D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; B:150 mm; with tapered bore:450 min-1; rs (min):5 mm; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:71.40 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH HR-4-XC Cam Follower and Track Roller - Stud Type | J:123.825 mm; N1:17.462 mm; A6:19.05 mm; S:0.794 mm; Limiting speed:3700 r/min; Attachment bolt diameter G:4 x 15.875; Basic dynamic load rating C:125 kN; L:4 x 158.75; A:60.325 mm; A5:30.956 mm; |
| SMITH HR-1-3/8-XB Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating 15 B Bearing C2:296000 N; Fillet Radius ra:3.00 mm; B:174.00 mm; Grease Speed Rating n1:1800 rpm; D:280.0000 mm; Basic Static Radial Load Rating 40 AA Pair Co1:915000 N; Basic Dynamic Radial Load Rating 40 AA Pair C1:559000 N; Basic Static Radial Load Rating 15 B Bearing Co2:345000 N; d:130.000 mm; Angle Third:40 º; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH HR-2-C Cam Follower and Track Roller - Stud Type | d:45.000 mm; B:25.00 mm; Fillet Radius ra:1.50 mm; D:100.0000 mm; Basic Static Radial Load Rating Co:46500 N; Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Dynamic Radial Load Rating C:59400 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Shields; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |