| No. | Brand | H | B | J | s | a | N | T | U |
| YR-2 | SMITH | - | 420 mm | - | - | - | - | - | - |
| MCR-90-SC | SMITH | 50 mm | - | - | - | - | - | - | - |
| PCR-5 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-22-SBC | SMITH | - | 335 mm | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
| MCR-26-B | SMITH | - | 167 mm | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| VCR-8-1/2 | SMITH | - | - | - | - | 105 mm | 8.8 mm | - | - |
| SMITH CR-1-7/8-B-SS Cam Follower and Track Roller - Stud Type | Width Plain B:5.0 mm; Oil Speed Rating Open/Shielded n2:54000 rpm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:44000 rpm; Sealed Speed Rating n3:31000 rpm; Shielded or Sealed B1:5.0 mm; Fillet Radius ra:0.30 mm; d:6.400 mm; |
| SMITH YR-2-X-SS Cam Follower and Track Roller - Yoke Type | Cap bolt, SAE grade:5; Stabilizing ring:SR-26-0; J max.:406.4 mm; Pa:31.2 kN; P90°:113 kN; N1:25.4 mm; Adapter sleeve assembly:SNW 126x4.1/2; P150°:68.1 kN; A2:269.875 mm; da:114.3 mm; |
| SMITH MCR-52-SC Cam Follower and Track Roller - Stud Type | Axial load factor Y:0.4; r3,4 min.:0.6 mm; Basic static load rating C0:49 kN; Da max.:55.9 mm; Limiting value e:0.3; Fatigue load limit Pu:6.1 kN; B:20 mm; da min.:35.3 mm; db min.:43 mm; Limiting speed:14000 r/min; |
| SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
| SMITH BCR-1-3/4-C Cam Follower and Track Roller - Stud Type | d1:105 mm; B:10.5 mm; d:55 mm; Mass shaft washer:0.5 kg; r1,2 min.:1.1 mm; |
| SMITH CR-5/8-SS Cam Follower and Track Roller - Stud Type | P120°:160 kN; P150°:145 kN; S:4.763 mm; Stabilizing ring:SR-44-38; End plug (suffix Y):EPR 23; da:198.438 mm; H:474.663 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; P180°:173 kN; |
| SMITH BCR-1-BC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:81900 N; B:53.98 mm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; |
| SMITH MCR-90-BC Cam Follower and Track Roller - Stud Type | Lock nut:AN 34; Labyrinth ring (dc shaft position):LOR 148; PosiTrac Plus contact element (dc shaft position):B10724-148; Da:309.999 mm; da:170 mm; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:119 kg; R1:115.888 mm; Appropriate attachment bolt size G:1 in; A1:171.45 mm; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH CR-11/16-XBC Cam Follower and Track Roller - Stud Type | H:551 mm; A1:280 mm; J6:740 mm; Eye bolt, size:2 x M 24; s:16 mm; P0°:4000 kN; Oil seal:2 x TSD 3156 U; A:315 mm; Oil level, max.:92 mm; H2:105 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
SMITH CR-1-XBEC Cam Follower and Track Roller - Stud Type Video
CR-1-3/4-XBEC - Smith Bearing - Applied Industrial ...
Smith Bearing CR-1-3/4-XBEC. Needle Bearing Cam Follower Stud Type Hex Head slot Sealed Eccentric Crowned. Item #105948441.
Smith Bearing CR-1-XBEC | Cam Follower Crowned Stud Hex ...
SMITH BEARING CR-1-XBEC Cam Follower Crowned Stud Hex Socket ; Bearing Material, Carbon Steel ; Bearing Type, Needle Roller,Sealed ; Dynamic Load Capacity, 2140 Lb ...Roller Type: Crowned, Hex Socket HeadStud Material: Carbon SteelStud Length: 1"Type: Stud, Eccentric
Cam Follower: 1.75 in Roller Dia., 1 in Roller Wd, 0.75 in Stud ...
Item # 11Y120 · Mfr. Model # CR-1-3/4-XBEC · UNSPSC # 31171505 · Catalog Page # N/A.Bearing Type: Needle Roller, SealedStud Material: Carbon SteelRoller Width: 1 inFace Design: Hex Socket
CR-1-XBEC Smith Bearing - Tools and Supplies - Distributors and ...
Find the best pricing for Smith Bearing CR-1-XBEC by comparing bulk discounts from 2 distributors. Octopart is the world's source for CR-1-XBEC availability ...
smith bearing cr-1-xbec
Looking for SMITH BEARING CR-1-XBEC BEARING? Price $28.31 + Free Shipping! ... Roller Diameter, 1 Inch | 25.4 Millimeter. Profile, Stud Type.Roller Width: 0.625 Inch | 15.875 MillimeterOther Features: Full Complement | Threaded E...Brand: SMITH BEARINGSeal Type: Sealed$28.31 · In stock
Cam Follower, Crowned, Stud, Hex Socket - Zoro Tools
Smith Bearing #CR-1-XBEC Specifications · Roller Style: Stud · Roller Shape: Crowned · Face Design: Hex Socket · Roller Dia.: 1.0 in · Roller Width: 0.625 in · Stud ...Roller Type: Crowned, Hex Socket HeadStud Length (In.): 1.000Stud Material: Carbon SteelStud Length: 1.0 in$37.13 · In stock
Smith Bearing CR-1 1/2-XBEC Cam Follower Needle Roller ...
Smith Bearing CR-1 1/2-XBEC Cam Follower Needle Roller Bearing, Crowned-Eccentric Stud with Hex-Drive Socket, 1.500" Roller Diameter: Amazon.com: Tools ...Head Style: HexMaterial: Alloy SteelItem Diameter: 1.5 inches
SMITH BEARING CR-1-3/4-XBEC Cam Follower Crowned ...
Find many great new & used options and get the best deals for SMITH BEARING CR-1-3/4-XBEC Cam Follower Crowned Stud Hex Socket at the best online prices at ...Brand: Smith BearingMPN: CR134XBEC
CR-1-XBEC - Detail - Manufacturer of Smith Bearing Cam ...
SMITH Bearing® Number, CR-1-XBEC. HEX Size, 1/4. (P) Lube Fitting Size, 3/16. (G) Eccentric Bushing Length Tolerance, N/A. (T) Thread U.N.F., N/A.
smith bearing cr-1-xbec - Cam Follower and Track Roller - BDI
1" Roller Diameter; 5/8" Roller Width; Crowned Roller Surface Profile; 7/16" Stud Diameter; 7/16-20 Thread Size; Standard Stud with Eccentric Bushing Stud ...