| No. | Brand | H | B | J | s | a | N | T | U |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| HR-1-5/8-X | SMITH | - | 16.00 mm | - | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| MYRV-8-S | SMITH | - | 54.00 mm | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| FCR-2-1/4 | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBE | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-XC | SMITH | - | 41.30 mm | - | - | - | - | - | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| PYR-7 | SMITH | - | 9 mm | - | - | 13.6 mm | - | - | - |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| HR-1-7/8-BC | SMITH | - | 42.00 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| CR-7/8-B-SS | SMITH | 631 mm | - | - | - | - | 50 mm | - | - |
| BCR-1-3/4-C | SMITH | - | 10.5 mm | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| SMITH PYR-8 Cam Follower and Track Roller - Yoke Type | L:419.1 mm; Cap bolt, SAE grade:5; Housing:SAW 524; P60°:185 kN; End plug (suffix Y):EPR 14; J1:69.85 mm; A1:120.65 mm; A2:254 mm; Da:215.001 mm; J min.:336.55 mm; |
| SMITH IRR-2 Needle Non Thrust Roller Bearings | Basic dynamic load rating C:433 kN; Fatigue load limit Pu:49 kN; da min.:108 mm; Calculation factor Y1:2.8; D1 ≈:159 mm; B:46 mm; Calculation factor Y2:4.2; Da max.:168 mm; b:8.3 mm; Limiting speed:4500 r/min; |
| SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | Bearing designation:634 ; Da:13.4 max; B:5 mm; Grease:35 000 min-1; D:16 mm; rs:0.3 mm; da:6.2 min; Pu:0.031 kN; ra:0.3 max; Oil:42 000 min-1; |
| SMITH CR-7/8-XBE Cam Follower and Track Roller - Stud Type | B:51.00 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:310.0000 mm; d:200.000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; |
| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
| SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; d:30.000 mm; B:23.00 mm; Basic Dynamic Radial Load Rating C:45700 N; Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Accessories:One Shield; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
SMITH MYRV-10-S Cam Follower and Track Roller - Yoke Type Video