| No. | Brand | H | B | J | s | a | N | T | U |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| HR-1-3/8-XB | SMITH | - | 174.00 mm | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| MCR-90-SC | SMITH | 50 mm | - | - | - | - | - | - | - |
| FYR-5 | SMITH | - | - | - | - | - | - | - | 20 mm |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| MYR-35-S | SMITH | - | 17.729 mm | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | 23.00 mm | - | - | - | - | - | - |
| PYR-8 | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| CR-1/2-A-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.00 mm; B:71.40 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH YAG-08 Cam Follower and Track Roller - Yoke Type | d3 max.:171.577 mm; B1:95.301 mm; B:22.479 mm; d1:111.125 mm; Lock washer:W 26; Lock nut:AN 26; G:129.692 mm; Mass adapter sleeve assembly:4.4 kg; Sleeve:S 26x4.3/8; Hydraulic nut:HMVC 26E; |
| SMITH HR-4-XC Cam Follower and Track Roller - Stud Type | J:123.825 mm; N1:17.462 mm; A6:19.05 mm; S:0.794 mm; Limiting speed:3700 r/min; Attachment bolt diameter G:4 x 15.875; Basic dynamic load rating C:125 kN; L:4 x 158.75; A:60.325 mm; A5:30.956 mm; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH PCR-5 Cam Follower and Track Roller - Stud Type | Housing:SAW 544; Max. speed for PosiTrac Plus seal:725 r/min; J1:133.35 mm; Stabilizing ring:SR-44-38; H2:95.25 mm; Ca:153.797 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; A2:304.8 mm; End plug (suffix Y):EPR 23; |
| SMITH MCRV-47-SBC Cam Follower and Track Roller - Stud Type | Reference speed:500 r/min; ra max.:4 mm; Housing washer:GS 89430; d1:300 mm; D:300 mm; Shaft washer:WS 89430; da min.:295 mm; D1:154 mm; Da max.:168 mm; r1,2 min.:4 mm; |
| SMITH MYR-8-SC Cam Follower and Track Roller - Yoke Type | K:6 mm; B:75 mm; da max.:308 mm; Limiting speed:1700 r/min; Fatigue load limit Pu:143 kN; Calculation factor Y1:4.2; d3:330 mm; Mass bearing + sleeve:40 kg; Reference speed:1600 r/min; D1 ≈:352 mm; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH BCR-1-BC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:81900 N; B:53.98 mm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; |
| SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type | D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; Basic Dynamic Radial Load Rating C:13000 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Seals; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; |
SMITH BCR-2-1/4-XC Cam Follower and Track Roller - Stud Type Video