| No. | Brand | H | B | J | s | a | N | T | U |
| DYR-1-7/8 | SMITH | - | 68.30 mm | - | - | - | - | - | - |
| PYR-8 | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| MPCR-52 | SMITH | - | 12.954 mm | - | - | - | - | - | - |
| MCRV-30-SB | SMITH | - | 15 mm | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| BCR-3/4-C | SMITH | - | 32 mm | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| MYR-10-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
| YAD-20 | SMITH | - | 28.00 mm | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| IRR-2 | SMITH | - | 46 mm | - | - | - | - | - | - |
| MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| MCR-30 | SMITH | - | - | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; P60°:128 kN; PG:1/4 NPT; Housing:SAF 618; H2:50.8 mm; h:50.8 mm; Stabilizing ring:2 x SR-1618; Initial grease fill:481.95 g; ba:42.069 mm; A1:111.125 mm; |
| SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | Calculation factor e:0.22; B1:31 mm; Limiting speed:11000 r/min; Calculation factor Y0:2.8; db min.:43 mm; r1,2 min.:1.1 mm; d3:58 mm; B4:10 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y1:2.9; |
| SMITH MCR-72-SB Cam Follower and Track Roller - Stud Type | d:105.000 mm; Accessories:Two Shields; Sealed Speed Rating n3:2400 rpm; Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:2.00 mm; B:26.00 mm; D:160.0000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Basic Dynamic Radial Load Rating C:79300 N; Grease Speed Rating Open/Shielded n1:4000 rpm; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
| SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
| SMITH BYR-1-1/8-XC Cam Follower and Track Roller - Yoke Type | P180°:84.5 kN; Da:240 mm; L:466.725 mm; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 13; Ca:89.789 mm; Initial grease fill:765.45 g; R1:79.375 mm; ba:48.419 mm; Appropriate attachment bolt size G:0.875 in; |
| SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH BCR-3/4-C Cam Follower and Track Roller - Stud Type | l7 min.:50 mm; dk:60 mm; r1 min.:0.6 mm; l2 max.:217 mm; B:32 mm; d:45 mm; h:163 mm; l1 min.:92 mm; Mass rod end:2.45 kg; Basic static load rating C0:200 kN; |
| SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type | Mass inner ring:0.084 kg; F:45 mm; d:40 mm; r, r1,2 min.:0.3 mm; B:30 mm; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH CR-3-1/4-XBC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:470 kg; d2 ≈:500 mm; Limiting speed:670 r/min; Da max.:694 mm; G1:44 mm; Calculation factor Y2:2.9; r1,2 min.:6 mm; G:Tr 420x5; B1:302 mm; Calculation factor Y0:1.8; |
SMITH HR-1-3/8-XB Cam Follower and Track Roller - Stud Type Video