| No. | Brand | H | B | J | s | a | N | T | U |
| BCR-3 | SMITH | - | - | - | - | - | - | - | - |
| MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
| MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
| BYR-1-1/8-XC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| HR-5/8-C | SMITH | - | 49.20 mm | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-62-C | SMITH | - | - | 710 mm | - | - | - | - | - |
| CR-5/8-SS | SMITH | 474.663 mm | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| YAG-08 | SMITH | - | 22.479 mm | - | - | - | - | - | - |
| BCR-1-3/4-C | SMITH | - | 10.5 mm | - | - | - | - | - | - |
| MYR-10-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| MYR-15-SC | SMITH | - | 150 mm | - | - | - | - | - | - |
| SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | Calculation factor e:0.22; B1:31 mm; Limiting speed:11000 r/min; Calculation factor Y0:2.8; db min.:43 mm; r1,2 min.:1.1 mm; d3:58 mm; B4:10 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y1:2.9; |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH BCR-1-XB Cam Follower and Track Roller - Stud Type | Accessories:One Seal; Basic Static Radial Load Rating Co:15000 N; d:20.000 mm; D:72.0000 mm; Sealed Speed Rating n3:7300 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; B:19.00 mm; Basic Dynamic Radial Load Rating C:30700 N; Fillet Radius ra:1.00 mm; |
| SMITH MCRV-13-C Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:163000 N; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; B:61.90 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; |
| SMITH DYR-2-1/2 Cam Follower and Track Roller - Yoke Type | d1 ≈:648.1 mm; Calculation factor A:26.9; r3,4 min.:3 mm; Reference speed:700 r/min; d:560 mm; Calculation factor e:0.8; Calculation factor Y1:0.78; Calculation factor Y0:0.66; Db max.:807 mm; Calculation factor Y2:1.24; |
| SMITH MCR-22-B Cam Follower and Track Roller - Stud Type | Calculation factor f2A:1; D2:161.9 mm; Preload class B GB:260 N; Calculation factor f1:1; Calculation factor fHC:1.01; b:2.2 mm; C3:4.3 mm; d:120 mm; Preload class C GC:780 N; r1,2 min.:2 mm; |
| SMITH CR-7/8-XBE Cam Follower and Track Roller - Stud Type | B:51.00 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:310.0000 mm; d:200.000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; Basic Static Radial Load Rating Co:245000 N; Sealed Speed Rating n3:1300 rpm; Basic Dynamic Radial Load Rating C:216000 N; |
| SMITH CR-7/8-B Cam Follower and Track Roller - Stud Type | RG:1/4 NPT; da:60.325 mm; Cap bolt:2 x 1/2-13 UNC; Da:130 mm; P90°:45.4 kN; R1:46.038 mm; P150°:25.4 kN; A1:79.375 mm; P180°:30.2 kN; Initial grease fill:68.04 g; |
| SMITH MUTD-50 Cam Follower and Track Roller - Yoke Type | H2:53.975 mm; Appropriate attachment bolt size G:0.75 in; R1:77.787 mm; Bearing:23224 CCK/W33; A2:187.325 mm; Cap bolt recommended tightening torque:400 N·m; da:106.362 mm; J min.:336.55 mm; RG:1/2 NPT; P180°:81.4 kN; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH CR-1-1/2-BC Cam Follower and Track Roller - Stud Type | with cylindrical bore:380 min-1; Grease:5850 kN; Oil:432.570 kN; d:420 mm; D:620 mm; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; B:150 mm; with tapered bore:450 min-1; rs (min):5 mm; |
| SMITH HR-1-7/8-BC Cam Follower and Track Roller - Stud Type | D:180.0000 mm; d:70.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:140000 N; B:42.00 mm; Basic Dynamic Radial Load Rating C:147000 N; Oil Speed Rating Open/Shielded n2:3900 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Accessories:One Shield & Snap-Ri; |
SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type Video