| No. | Brand | H | B | J | s | a | N | T | U |
| HR-1-1/2-XBC | SMITH | - | 19.00 mm | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| HR-1-XBC | SMITH | - | 49 mm | - | - | - | - | - | - |
| CR-1-XBEC | SMITH | - | 44 mm | - | - | - | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-BC | SMITH | - | 53.98 mm | - | - | - | - | - | - |
| BCR-3/4-C | SMITH | - | 32 mm | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
| CR-1-7/8-B-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-85-BC | SMITH | - | - | - | - | - | - | - | - |
| FCR-4-1/2 | SMITH | - | 50.00 mm | - | - | - | - | - | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| BCR-3-XC | SMITH | - | 66.70 mm | - | - | - | - | - | - |
| SMITH MCRV-85-S Cam Follower and Track Roller - Stud Type | N4 max.:30 mm; Cap bolt, rec. tightening torque:600 N·m; Q180°:2100 kN; Oil level, min.:81 mm; bc:208.5 mm; H:715 mm; bb:141 mm; N1:42 mm; A1:360 mm; End cover:ETS 3176 R; |
| SMITH BCR-3 Cam Follower and Track Roller - Stud Type | B1:296 mm; G:Tr 600x6; Limiting speed:630 r/min; ra max.:5 mm; Basic static load rating C0:14600 kN; Da max.:797 mm; b:22.3 mm; Calculation factor e:0.28; Fatigue load limit Pu:980 kN; Basic dynamic load rating C:7621 kN; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | a:2.381 mm; A:69.85 mm; L:174.625 mm; N1:17.462 mm; Mass bearing unit:7.76 kg; Attachment bolt diameter G:4 x 15.875; A5:34.131 mm; A6:25.4 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; |
| SMITH HR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass roller and cage thrust assembly:9.42 kg; d:240 mm; D:340 mm; Limiting speed:800 r/min; Roller and cage thrust assembly:K 81248 M; Fatigue load limit Pu:390 kN; Dw:32 mm; Reference speed:400 r/min; Housing washer:GS 81248; Basic dynamic load rating C:1100 kN; |
| SMITH DYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating n2:3600 rpm; B:68.30 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; d:75.000 mm; D:160.0000 mm; |
| SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type | Mass inner ring:0.084 kg; F:45 mm; d:40 mm; r, r1,2 min.:0.3 mm; B:30 mm; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Oil Speed Rating Open/Shielded n2:4000 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:80000 N; Basic Dynamic Radial Load Rating C:85200 N; D:180.0000 mm; B:28.00 mm; |
| SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
| SMITH MCR-62-C Cam Follower and Track Roller - Stud Type | Appropriate attachment bolt, rec. tightening torque:2280 N·m; Adapter sleeve:H 3064/11.15/16; P55°:6000 kN; Cap bolt, rec. tightening torque:400 N·m; Oil seal:2 x TSD 3064/11.15/1; J1:190 mm; Mass housing:301 kg; Locating ring:6 x FRB 10/480; L:830 mm; J:710 mm; |
| SMITH MCR-85-BC Cam Follower and Track Roller - Stud Type | Limiting speed:24000 r/min; da min.:7 mm; Basic dynamic load rating C:2.03 kN; ra max.:0.3 mm; D2 ≈:16.5 mm; Da max.:17 mm; Calculation factor f0:12.1; da max.:8.4 mm; D:19 mm; d2 ≈:8.5 mm; |
| SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
| SMITH YAF-04 Cam Follower and Track Roller - Yoke Type | H:147.637 mm; End plug (suffix Y):EPR 6; h:27.781 mm; Pa:6.09 kN; PG:1/8 NPT; Adapter sleeve assembly:SNW 13x2.1/8; da:53.975 mm; P150°:16 kN; P120°:17.8 kN; A2:184.15 mm; |
SMITH FCR-4-1/2 Cam Follower and Track Roller - Stud Type Video