| No. | Brand | H | B | J | s | a | N | T | U |
| MYRV-10-S | SMITH | - | 27.254 mm | - | - | - | - | - | - |
| YR-1-3/4-X-SS | SMITH | - | 12.00 mm | - | - | - | - | - | - |
| FCR-2-1/4 | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/2-BC | SMITH | - | 150 mm | - | - | - | - | - | - |
| MCR-19-SC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| CR-3-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| DCR-6 | SMITH | - | 46.00 mm | - | - | - | - | - | - |
| MCRV-40-SB | SMITH | - | - | - | - | - | 11.5 mm | 42.2 mm | - |
| YR-2-3/4-X | SMITH | - | 13 mm | - | - | - | - | - | - |
| MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
| BYR-3/4 | SMITH | - | - | - | - | - | - | 85 mm | - |
| HR-3-1/4-XC | SMITH | - | 34 mm | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| CR-7/8-XBE | SMITH | - | 51.00 mm | - | - | - | - | - | - |
| YR-4-X | SMITH | - | 33.00 mm | - | - | - | - | - | - |
| CR-2-X-SS | SMITH | - | - | 600 mm | - | - | 42 mm | - | - |
| MCRV-13-C | SMITH | - | 61.90 mm | - | - | - | - | - | - |
| MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
| HR-4-XC | SMITH | - | - | 123.825 mm | - | - | - | - | - |
| YAF-04 | SMITH | 147.637 mm | - | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| MCR-13-SB | SMITH | - | - | - | - | - | - | - | 13 mm |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |
| SMITH MYR-35-S Cam Follower and Track Roller - Yoke Type | B:17.729 mm; B1:66.954 mm; G:89.586 mm; d:90 mm; Threads per inch:12; Hydraulic nut:HMVC 18E; Lock washer:W 18; d1:82.55 mm; Lock nut:AN 18; Mass adapter sleeve assembly:1.4 kg; |
| SMITH MPCR-32 Cam Follower and Track Roller - Stud Type | r3,4 min.:6.4 mm; d:406.4 mm; Fatigue load limit Pu:815 kN; Basic dynamic load rating C:5100 kN; Mass bearing:184 kg; D1 ≈:496 mm; Calculation factor Y2:2.1; Basic static load rating C0:10200 kN; D:546.1 mm; Calculation factor Y1:1.4; |
| SMITH HR-4-XC Cam Follower and Track Roller - Stud Type | J:123.825 mm; N1:17.462 mm; A6:19.05 mm; S:0.794 mm; Limiting speed:3700 r/min; Attachment bolt diameter G:4 x 15.875; Basic dynamic load rating C:125 kN; L:4 x 158.75; A:60.325 mm; A5:30.956 mm; |
| SMITH BYR-3/4 Cam Follower and Track Roller - Yoke Type | T:85 mm; d:80 mm; Limiting speed:4000 r/min; r5 min.:1 mm; Ca min.:5 mm; Basic static load rating C0:530 kN; 2B:78 mm; Reference speed:2400 r/min; Calculation factor Y0:0.8; b:15 mm; |
| SMITH MYRV-8-S Cam Follower and Track Roller - Yoke Type | Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; B:54.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:95000 N; d:60.000 mm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH CR-5/8-SS Cam Follower and Track Roller - Stud Type | P120°:160 kN; P150°:145 kN; S:4.763 mm; Stabilizing ring:SR-44-38; End plug (suffix Y):EPR 23; da:198.438 mm; H:474.663 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; P180°:173 kN; |
| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH BCR-1-3/4-C Cam Follower and Track Roller - Stud Type | d1:105 mm; B:10.5 mm; d:55 mm; Mass shaft washer:0.5 kg; r1,2 min.:1.1 mm; |
| SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; P60°:128 kN; PG:1/4 NPT; Housing:SAF 618; H2:50.8 mm; h:50.8 mm; Stabilizing ring:2 x SR-1618; Initial grease fill:481.95 g; ba:42.069 mm; A1:111.125 mm; |
SMITH YAG-44 Cam Follower and Track Roller - Yoke Type Video