No. | Brand | H | B | J | s | a | N | T | U |
MPCR-32 | SMITH | - | - | - | - | - | - | - | - |
DYR-1-1/4 | SMITH | - | 31 mm | - | - | - | - | - | - |
DCR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-XBC | SMITH | - | 38.00 mm | - | - | - | - | - | - |
MCR-52-SC | SMITH | - | 20 mm | - | - | - | - | - | - |
CR-11/16-XBC | SMITH | 551 mm | - | - | 16 mm | - | - | - | - |
BCR-1-3/4-C | SMITH | - | 10.5 mm | - | - | - | - | - | - |
MFYR-85 | SMITH | - | 5 mm | - | - | - | - | - | - |
BCR-2-1/2-BC | SMITH | - | 1.1250 in | - | - | - | - | - | - |
CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
MCRV-22-SBC | SMITH | - | 335 mm | - | - | - | - | - | - |
CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
MCR-35-B | SMITH | - | 29.00 mm | - | - | - | - | - | - |
CR-7/8-B | SMITH | - | - | - | - | - | - | - | - |
DCR-1-5/8 | SMITH | - | 1.25 mm | - | - | - | - | - | - |
YR-2-X-SS | SMITH | - | - | - | - | - | - | - | - |
MCR-85-BC | SMITH | - | - | - | - | - | - | - | - |
CR-2 | SMITH | - | 13.5 mm | - | - | - | - | - | - |
MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
SMITH HR-1-C Cam Follower and Track Roller - Stud Type | D:35 mm; d2:21.1 mm; Preload class B GB:150 N; Number of balls z:12; Reference grease quantity Gref:0.68 cm³; r3,4 min.:0.15 mm; Preload class C GC:300 N; Calculation factor e:0.68; Mass bearing:0.03 kg; Static axial stiffness, preload class C:99 N/µm; |
SMITH CR-1-3/4-SS Cam Follower and Track Roller - Stud Type | D:100.0000 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:13700 N; Basic Dynamic Radial Load Rating C:13000 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Seals; B:10.00 mm; Sealed Speed Rating n3:3600 rpm; |
SMITH CR-1-1/4-B-SS Cam Follower and Track Roller - Stud Type | B2:152 mm; G:M 200x3; d1:180 mm; B1:145 mm; Nut for removal:KM 40; G1:25 mm; Hydraulic nut:HMV 40 E; Mass withdrawal sleeve:5.4 kg; d:190 mm; |
SMITH HR-1-3/8 Cam Follower and Track Roller - Stud Type | Mass inner ring:0.084 kg; F:45 mm; d:40 mm; r, r1,2 min.:0.3 mm; B:30 mm; |
SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | Bearing designation:634 ; Da:13.4 max; B:5 mm; Grease:35 000 min-1; D:16 mm; rs:0.3 mm; da:6.2 min; Pu:0.031 kN; ra:0.3 max; Oil:42 000 min-1; |
SMITH MCR-35-B Cam Follower and Track Roller - Stud Type | D:120.0000 mm; Grease Speed Rating n1:4800 rpm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:85200 N; B:29.00 mm; d:55.000 mm; Basic Static Radial Load Rating Co:60000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; |
SMITH HR-1/2-B Cam Follower and Track Roller - Stud Type | T:292.1 mm; Comparative axial load rating CFa:153 kN; B:292.1 mm; Basic dynamic load rating C:3910 kN; d:347.662 mm; Calculation factor Y1:2; d1 ≈:372 mm; Design variant/feature:TQOSN/GWSI; Comparative radial load rating CF:950 kN; r1,2 min.:1 mm; |
SMITH MYRV-40-SC Cam Follower and Track Roller - Yoke Type | B:21 mm; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; B1:80 mm; d:130 mm; Hydraulic nut:HMV 26 E; Lock nut:KML 26; G:M 130x2; d3:155 mm; Locking device:MBL 26; |
SMITH MCR-85-BC Cam Follower and Track Roller - Stud Type | Limiting speed:24000 r/min; da min.:7 mm; Basic dynamic load rating C:2.03 kN; ra max.:0.3 mm; D2 ≈:16.5 mm; Da max.:17 mm; Calculation factor f0:12.1; da max.:8.4 mm; D:19 mm; d2 ≈:8.5 mm; |
SMITH BCR-3-XC Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2800 rpm; D:150.0000 mm; B:66.70 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:No Shield, no Seal; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; |
SMITH HR-5/8-C Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:2600 rpm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:124000 N; B:49.20 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:110000 N; |
SMITH MCRV-40-SB Cam Follower and Track Roller - Stud Type | R1:21 mm; J7:12.5 mm; Db1:77 mm; B4:5 mm; T:42.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A1:13 mm; A:32.5 mm; N:11.5 mm; GN:1/4-28 SAE-LT; |
SMITH MYR-10-C Cam Follower and Track Roller - Yoke Type Video