| SMITH CR-2-X-SS Cam Follower and Track Roller - Stud Type | J:600 mm; H1:240 mm; db:280 mm; N:42 mm; H2:95 mm; Labyrinth seal:2 x TS 60; bc:141.5 mm; Initial grease fill, 40%:3.9 kg; ba max.:136 mm; |
| SMITH MCRV-85-S Cam Follower and Track Roller - Stud Type | N4 max.:30 mm; Cap bolt, rec. tightening torque:600 N·m; Q180°:2100 kN; Oil level, min.:81 mm; bc:208.5 mm; H:715 mm; bb:141 mm; N1:42 mm; A1:360 mm; End cover:ETS 3176 R; |
| SMITH DCR-1-1/2 Cam Follower and Track Roller - Stud Type | d2 max.:65 mm; Basic dynamic load rating C:137 kN; w:30 mm; d:25 mm; Specific dynamic load factor K:300 N/mm²; G:M 24x2; d4 ≈:35 mm; dk:35.5 mm; r1 min.:0.6 mm; Basic static load rating C0:90 kN; |
| SMITH MCR-52-SB Cam Follower and Track Roller - Stud Type | d:15 mm; B:19 mm; D:42 mm; a:27 mm; rs (min):1 mm; Pu:0.541 kN; da:21 min; Weight:0.13 kg; Dynamic (Cr):17.369 kN; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH CR-5/8 Cam Follower and Track Roller - Stud Type | Attainable speed for oil-air lubrication:50000 r/min; Ball diameter Dw:4.762 mm; Basic static load rating C0:9.65 kN; Calculation factor f:1.08; Static axial stiffness, preload class A:32 N/µm; d:45 mm; dn:54.2 mm; Preload class B GB:48 N; Static axial stiffness, preload class C:66 N/µm; Number of balls z:27; |
| SMITH HR-2-C Cam Follower and Track Roller - Stud Type | d:45.000 mm; B:25.00 mm; Fillet Radius ra:1.50 mm; D:100.0000 mm; Basic Static Radial Load Rating Co:46500 N; Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Dynamic Radial Load Rating C:59400 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Shields; |
| SMITH CR-11/16-XBC Cam Follower and Track Roller - Stud Type | H:551 mm; A1:280 mm; J6:740 mm; Eye bolt, size:2 x M 24; s:16 mm; P0°:4000 kN; Oil seal:2 x TSD 3156 U; A:315 mm; Oil level, max.:92 mm; H2:105 mm; |
| SMITH YR-2-3/4-X Cam Follower and Track Roller - Yoke Type | d:10 mm; Mass inner ring:0.0074 kg; B:13 mm; r, r1,2 min.:0.3 mm; F:14 mm; |
| SMITH VCR-8-1/2 Cam Follower and Track Roller - Stud Type | Mass bearing:1.13 kg; a:105 mm; N:8.8 mm; Attainable speed:4300 r/min; r1,2 min.:0.3 mm; ra max.:0.3 mm; r3,4 min.:0.6 mm; Required attachment bolt size (DIN 912):M8; Preload:2750 N; Static axial stiffnes:930 N/µm; |
| SMITH FYR-5 Cam Follower and Track Roller - Yoke Type | Limiting speed:8500 r/min; Basic dynamic load rating C:38 kN; Mass needle roller and cage assembly:0.067 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 55x63x5; Basic static load rating C0:75 kN; Fw:55 mm; U:20 mm; Ew:63 mm; Reference speed:7500 r/min; Fatigue load limit Pu:9.15 kN; |
| SMITH MCR-13-SB Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:16.8 kN; Fw:40 mm; Mass needle roller and cage assembly:0.018 kg; Reference speed:10000 r/min; Basic static load rating C0:32.5 kN; Limiting speed:12000 r/min; U:13 mm; Ew:45 mm; Fatigue load limit Pu:3.8 kN; |