| No. | Brand | H | B | J | s | a | N | T | U |
| BCR-2-1/4-BC | SMITH | - | - | - | - | 2.381 mm | - | - | - |
| MCRV-26-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/8 | SMITH | - | 30 mm | - | - | - | - | - | - |
| MCR-90-BC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-40-SC | SMITH | - | 21 mm | - | - | - | - | - | - |
| HR-1/2-B | SMITH | - | 292.1 mm | - | - | - | - | 292.1 mm | - |
| MFCR-40 | SMITH | - | 20.60 mm | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| YAG-44 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-SS | SMITH | - | 10.00 mm | - | - | - | - | - | - |
| MYR-8-SC | SMITH | - | 75 mm | - | - | - | - | - | - |
| CR-1-1/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| PYR-7 | SMITH | - | 9 mm | - | - | 13.6 mm | - | - | - |
| CR-3/4-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| YR-2-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| PCR-3-1/4 | SMITH | - | 18.00 mm | - | - | - | - | - | - |
| HR-2-C | SMITH | - | 25.00 mm | - | - | - | - | - | - |
| MCR-22-B | SMITH | - | - | - | - | - | - | - | - |
| CR-2 | SMITH | - | 13.5 mm | - | - | - | - | - | - |
| BCR-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4 | SMITH | - | 30 mm | - | - | - | - | - | - |
| MCR-52-SB | SMITH | - | 19 mm | - | - | 27 mm | - | - | - |
| MCR-90-SC | SMITH | 50 mm | - | - | - | - | - | - | - |
| CR-1-1/8-XBEC | SMITH | - | 71.40 mm | - | - | - | - | - | - |
| MCR-72-SB | SMITH | - | 26.00 mm | - | - | - | - | - | - |
| PYR-8 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-BC | SMITH | - | 80 mm | - | - | - | - | - | - |
| SMITH CR-2 Cam Follower and Track Roller - Stud Type | r1,2 min.:1.5 mm; Mass shaft washer:2.77 kg; d:260 mm; B:13.5 mm; d1:317 mm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Static axial stiffness, preload class D:374 N/µm; Ball diameter Dw:19.05 mm; d:110 mm; Da max.:161 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.09; ra max.:2 mm; Fatigue load limit Pu:3.9 kN; Preload class B GB:840 N; Calculation factor f1:1; |
| SMITH PCR-3-1/4 Cam Follower and Track Roller - Stud Type | d:85.000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3200 rpm; D:120.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:31900 N; Oil Speed Rating Open/Shielded n2:6300 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:30000 N; Grease Speed Rating Open/Shielded n1:5300 rpm; |
| SMITH FCR-4-1/2 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:216000 N; Oil Speed Rating Open/Shielded n2:2700 rpm; Fillet Radius ra:2.50 mm; D:240.0000 mm; Basic Static Radial Load Rating Co:250000 N; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:One Shield; B:50.00 mm; |
| SMITH CR-2-XBE Cam Follower and Track Roller - Stud Type | Dimension B:6.1875 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension S1:1.0000 in; Dimension L:3.8125 in; Diameter G:0.5313 in; Dimension F:0.5625 in; Distance J:2.0000 in; Shaft Diameter D:1 1/4 in; Weight W:1.50 lb; Pin Dia BS:1/2; |
| SMITH MCR-19-SC Cam Follower and Track Roller - Stud Type | RG:3/8 NPT; P60°:128 kN; PG:1/4 NPT; Housing:SAF 618; H2:50.8 mm; h:50.8 mm; Stabilizing ring:2 x SR-1618; Initial grease fill:481.95 g; ba:42.069 mm; A1:111.125 mm; |
| SMITH YAF-04 Cam Follower and Track Roller - Yoke Type | H:147.637 mm; End plug (suffix Y):EPR 6; h:27.781 mm; Pa:6.09 kN; PG:1/8 NPT; Adapter sleeve assembly:SNW 13x2.1/8; da:53.975 mm; P150°:16 kN; P120°:17.8 kN; A2:184.15 mm; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Mass bearing + sleeve:20.2 kg; K:6 mm; B:80 mm; Calculation factor e:0.28; Da max.:238 mm; d3:195 mm; Calculation factor Y1:2.4; Basic static load rating C0:1200 kN; d1:135 mm; r1,2 min.:2.1 mm; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | a:2.381 mm; A:69.85 mm; L:174.625 mm; N1:17.462 mm; Mass bearing unit:7.76 kg; Attachment bolt diameter G:4 x 15.875; A5:34.131 mm; A6:25.4 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; |
| SMITH HR-1-XBC Cam Follower and Track Roller - Stud Type | α:6 °; r1 min.:1 mm; d:70 mm; w:80 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; d4 ≈:92 mm; l4 max.:284 mm; l5 ≈:40 mm; B:49 mm; |
| SMITH MCRV-85-S Cam Follower and Track Roller - Stud Type | N4 max.:30 mm; Cap bolt, rec. tightening torque:600 N·m; Q180°:2100 kN; Oil level, min.:81 mm; bc:208.5 mm; H:715 mm; bb:141 mm; N1:42 mm; A1:360 mm; End cover:ETS 3176 R; |
| SMITH HR-1-3/4 Cam Follower and Track Roller - Stud Type | Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; D:30 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:30 mm; Permissible sliding velocity v max.:5 m/s; |
SMITH YAG-08 Cam Follower and Track Roller - Yoke Type Video