| SMITH IRR-2 Needle Non Thrust Roller Bearings | Basic dynamic load rating C:433 kN; Fatigue load limit Pu:49 kN; da min.:108 mm; Calculation factor Y1:2.8; D1 ≈:159 mm; B:46 mm; Calculation factor Y2:4.2; Da max.:168 mm; b:8.3 mm; Limiting speed:4500 r/min; |
| SMITH MCRV-22-SBC Cam Follower and Track Roller - Stud Type | B:335 mm; b:22.3 mm; r1,2 min.:7.5 mm; F:618 mm; Design variant/feature:NNU/W33; D:870 mm; rb max.:6 mm; Fatigue load limit Pu:1160 kN; r3,4 min.:7.5 mm; Da max.:837 mm; |
| SMITH MCR-90-SC Cam Follower and Track Roller - Stud Type | rs (min):1.5 mm; d1:155 mm; dynamic Cr:236.640 kN; Oil:1 500 min-1; static Cor:556.000 kN; D1:93 mm; Pu:21.960 kN; Grease:1 100 min-1; H:50 mm; d:90 mm; |
| SMITH MCR-52-SC Cam Follower and Track Roller - Stud Type | Axial load factor Y:0.4; r3,4 min.:0.6 mm; Basic static load rating C0:49 kN; Da max.:55.9 mm; Limiting value e:0.3; Fatigue load limit Pu:6.1 kN; B:20 mm; da min.:35.3 mm; db min.:43 mm; Limiting speed:14000 r/min; |
| SMITH CR-11/16-XBC Cam Follower and Track Roller - Stud Type | H:551 mm; A1:280 mm; J6:740 mm; Eye bolt, size:2 x M 24; s:16 mm; P0°:4000 kN; Oil seal:2 x TSD 3156 U; A:315 mm; Oil level, max.:92 mm; H2:105 mm; |
| SMITH YAG-44 Cam Follower and Track Roller - Yoke Type | Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Initial grease fill:2154.6 g; h:56.356 mm; Bearing:23048 CCK/W33; End plug (suffix Y):X-5217-4; R1:122.237 mm; H2:85.725 mm; da:214.313 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| SMITH PYR-7 Cam Follower and Track Roller - Yoke Type | B:9 mm; Preload class D GD:320 N; Preload class B GB:80 N; Static axial stiffness, preload class C:109 N/µm; a:13.6 mm; Number of balls z:20; Da max.:45 mm; Calculation factor f:1.08; r1,2 min.:0.3 mm; Static axial stiffness, preload class D:145 N/µm; |
| SMITH CR-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | Calculation factor e:0.22; B1:31 mm; Limiting speed:11000 r/min; Calculation factor Y0:2.8; db min.:43 mm; r1,2 min.:1.1 mm; d3:58 mm; B4:10 mm; Permissible angular misalignment α:2.5 °; Calculation factor Y1:2.9; |
| SMITH BCR-1/2-BC Cam Follower and Track Roller - Stud Type | P150°:113 kN; RG:3/4 NPT; Appropriate attachment bolt size G:1 in; Cap bolt:1-8 UNC; P60°:345 kN; Ca:95.809 mm; Pa:43.6 kN; P180°:133 kN; N1:28.575 mm; ba:74.612 mm; |
| SMITH BCR-1-BC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:81900 N; B:53.98 mm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; |
| SMITH FCR-4-1/2 Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:216000 N; Oil Speed Rating Open/Shielded n2:2700 rpm; Fillet Radius ra:2.50 mm; D:240.0000 mm; Basic Static Radial Load Rating Co:250000 N; d:110.000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:One Shield; B:50.00 mm; |
| SMITH HR-1-C Cam Follower and Track Roller - Stud Type | D:35 mm; d2:21.1 mm; Preload class B GB:150 N; Number of balls z:12; Reference grease quantity Gref:0.68 cm³; r3,4 min.:0.15 mm; Preload class C GC:300 N; Calculation factor e:0.68; Mass bearing:0.03 kg; Static axial stiffness, preload class C:99 N/µm; |