| No. | Brand | G | L | w | b | D | F | C | T |
| NJ-2220E M C/3 | CONSOLIDATED BEARING | - | - | - | 22.3 mm | - | - | - | - |
| 7216 B | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 22205E C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| MS-18-AC | CONSOLIDATED BEARING | - | 558.8 mm | - | - | - | - | - | - |
| 6306-ZZNR | CONSOLIDATED BEARING | - | - | - | - | 68.0000 mm | - | - | - |
| NUP-318 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| AXK-150190 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5309 C/2 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6203 M P/5 | CONSOLIDATED BEARING | - | 233.375 mm | - | - | - | - | - | - |
| N-206E M C/2 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | 26 mm |
| SS623-ZZ | CONSOLIDATED BEARING | - | - | - | - | 130.0000 mm | - | - | - |
| F61801 | CONSOLIDATED BEARING | - | - | - | - | 100.0000 mm | - | - | - |
| NU-214E C/2 | CONSOLIDATED BEARING | - | - | - | - | 80.0000 mm | - | - | - |
| NJ-320 M | CONSOLIDATED BEARING | - | - | - | - | 240.0000 mm | - | - | - |
| NJ-216E | CONSOLIDATED BEARING | - | 679.45 mm | - | - | - | - | - | - |
| 33013 P/6 | CONSOLIDATED BEARING | - | - | - | - | - | 18 mm | - | - |
| 22309 M C/4 | CONSOLIDATED BEARING | - | - | - | - | 20 mm | - | - | - |
| RNA-6906 | CONSOLIDATED BEARING | - | - | - | - | 200.0000 mm | - | - | - |
| 5315 NR C/3 | CONSOLIDATED BEARING | - | - | - | - | 100 mm | - | 30 mm | 38.25 mm |
| NUP-2224 | CONSOLIDATED BEARING | - | - | - | - | 950 mm | - | - | - |
| CONSOLIDATED BEARING NU-220E P/5 Roller Bearings | Fillet Radius ra:1.50 mm; Accessories:Two Seals; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:58500 N; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; Basic Dynamic Radial Load Rating C:70200 N; B:36.50 mm; d:60.000 mm; D:110.0000 mm; |
| CONSOLIDATED BEARING 626-ZZ Single Row Ball Bearings | r1s (min):2.1 mm; Dynamic (Ca):168 kN; b1:16.5 mm; E:127 mm; s:2 mm; d2:60 mm; Static (Coa):158 kN; B:35 mm; rs (min):2.1 mm; Pu:18.850 kN; |
| 2.25 Inch | 57.15 Millimeter x 5 Inch | 127 Millimeter x 1.25 Inch | 31.75 Millimeter CONSOLIDATED BEARING MS-16-AC D Angular Contact Ball Bearings | G:950.214 mm; Mass lock nut:175 kg; d1:1028.7 mm; d3 max.:1092.327 mm; d2:1031.494 mm; Threads per inch:3; Hexagonal head bolt:3/4-10x1-1/2; B:100.406 mm; b:62.992 mm; Locking device:PL 950; Size (mm):2.25 Inch | 57.15 Millimeter x 5 Inch | 127 Millimeter x 1.25 Inch | 31.75 Millimeter ; |
| 2.75 Inch | 69.85 Millimeter x 6.25 Inch | 158.75 Millimeter x 1.375 Inch | 34.925 Millimeter CONSOLIDATED BEARING MS-18-AC Angular Contact Ball Bearings | Appropriate attachment bolt size G:1 in; P120°:85.9 kN; ba:68.263 mm; P90°:136 kN; L:558.8 mm; Cap bolt:4 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; PosiTrac Plus contact element:2 x B10724-148; J min.:441.325 mm; da:163.512 mm; Size (mm):2.75 Inch | 69.85 Millimeter x 6.25 Inch | 158.75 Millimeter x 1.375 Inch | 34.925 Millimeter ; |
| CONSOLIDATED BEARING 61924-2RS Single Row Ball Bearings | l7 min.:85 mm; d2 max.:162 mm; Basic dynamic load rating C:315 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:43 mm; B:49 mm; α:6 °; l1 min.:132 mm; Mass rod end:11.3 kg; l2 max.:349 mm; |
| CONSOLIDATED BEARING NU-214E C/2 Roller Bearings | Oil Speed Rating n2:7500 rpm; D:80.0000 mm; B:30.20 mm; Sealed Speed Rating n3:5600 rpm; Basic Static Radial Load Rating Co:34000 N; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:44900 N; Fillet Radius ra:1.00 mm; d:40.000 mm; Accessories:Shield & Seal & Snap; |
| 3.15 Inch | 80 Millimeter x 5.512 Inch | 140 Millimeter x 1.024 Inch | 26 Millimeter CONSOLIDATED BEARING NJ-216E Cylindrical Roller Bearings | Labyrinth ring:2 x LOR 149; End plug (suffix Y):EPR 19; Housing:SSAFS 536; da:165.1 mm; L:679.45 mm; PG:1/4 NPT; H2:76.2 mm; R2:41.275 mm; Ca:95.809 mm; Cap bolt, SAE grade:8; Size (mm):3.15 Inch | 80 Millimeter x 5.512 Inch | 140 Millimeter x 1.024 Inch | 26 Millimeter ; |
| 0.669 Inch | 17 Millimeter x 1.457 Inch | 37 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NAS-17 Needle Non Thrust Roller Bearings | Permissible sliding velocity v max.:5 m/s; D:85 mm; Tolerance shaft:h8; Mass bushing:1.01 kg; d:70 mm; B:90 mm; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Size (mm):0.669 Inch | 17 Millimeter x 1.457 Inch | 37 Millimeter x 0.787 Inch | 20 Millimeter ; |
| CONSOLIDATED BEARING 29384 M Thrust Roller Bearing | rs (min):2 mm; dynamic Cr:272.500 kN; Grease:1 200 min-1; Oil:1 600 min-1; d1:150 mm; static Cor:553.000 kN; Pu:23.970 kN; H:60 mm; d:70 mm; D:150 mm; |
| CONSOLIDATED BEARING E-16 Single Row Ball Bearings | Mass adapter sleeve assembly:343 kg; d1:850 mm; G:Tr 900x7; d:900 mm; Hydraulic nut:HMV 180E; B1:326 mm; Locking device:MS 30/900-850; B:100 mm; G3:13 mm; G2:G 1/8; |
| CONSOLIDATED BEARING NUKR-85X Cam Follower and Track Roller - Stud Type | d:440 mm; C:450 mm; Basic dynamic load rating C:7810 kN; D:620 mm; Mass bearing:440 kg; D1 ≈:556.3 mm; α:20 °; K:9 mm; b:16.7 mm; F:487 mm; |
| 1.575 Inch | 40 Millimeter x 2.165 Inch | 55 Millimeter x 1.181 Inch | 30 Millimeter CONSOLIDATED BEARING NKI-40/30 P/6 Needle Non Thrust Roller Bearings | D:80.0000 mm; Basic Static Radial Load Rating Co:28500 N; Grease Speed Rating Open/Shielded n1:7000 rpm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:39300 N; Oil Speed Rating Open/Shielded n2:8500 rpm; d:35.000 mm; B:21.00 mm; Accessories:Two Shields & Snap-R; Size (mm):1.575 Inch | 40 Millimeter x 2.165 Inch | 55 Millimeter x 1.181 Inch | 30 Millimeter ; |
2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.811 Inch | 46 Millimeter CONSOLIDATED BEARING NU-2312E Cylindrical Roller Bearings Video